Document IIF

Recherches sur une pompe à chaleur aérothermique couplée à un compresseur à spirale et un éjecteur à injection de vapeur muni d'un économiseur.

Research on air-source heat pump coupled with economized vapor injection scroll compressor and ejector.

Auteurs : XU S., MA G.

Type d'article : Article, Article de la RIF

Résumé

The performance of the heat pump can be improved further when running under low temperature conditions when an ejector is used in a heat pump system coupled with economized vapor injection (EVI) scroll compressor. In this paper, the design method of the heat pump system with ejector (EVIe) is presented, and the process for designing the heat pump with ejector has been summarized. The optimal location of the vapor injection inlets is at the place where the vapor can inject into the working chambers when they just be closed. The reasonable value for the entrainment ratio u of the ejector is between 0.1 and 0.2. One prototype heat pump was designed under the condition of the evaporation temperature of -20°C, and an experimental setup was established to test the prototype. The measured results demonstrated that the heating EER of the heat pump system with ejector could reach about 4% higher than that of the system without ejector when the heating capacity remained nearly constant.

Documents disponibles

Format PDF

Pages : 1587-1595

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Research on air-source heat pump coupled with economized vapor injection scroll compressor and ejector.
  • Identifiant de la fiche : 30001657
  • Langues : Anglais
  • Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 34 - n. 7
  • Date d'édition : 11/2011

Liens


Voir d'autres articles du même numéro (18)
Voir la source