Partager

Système de tube de Stirling à pulsation avec un piston déplaceur entraîné par gaz chaud.

Pulse tube Stirling machine with warm gas-driven displacer.

Auteurs : ZHU S., NOGAWA M.

Type d'article : Article

Résumé

A pulse tube type Stirling machine with warm gas-driven displacer which has a displacer rod is discussed with numerical simulation when it is used as a cryogenic refrigerator, room temperature refrigerator and engine. It has both the advantages of gas-driven-Stirling machine with high efficiency and simplicity and the advantages of pulse tube machine with no moving parts at low temperatures. A nodal analysis method that includes the linear motor and the displacer in the machine is introduced. Numerical results show that it has high potential to be used as the cryogenic refrigerator, room temperature refrigerator and engine. In this type of machine, there is an optimum phase angle between displacer and piston, and an optimum swept volume ratio of displacer over compressor for efficiency. The phase angle and swept volume ratio can be adjusted by the natural frequency of the displacer and the diameter of the displacer rod when it is used as a refrigerator. [Reprinted with permission from Elsevier. Copyright, 2010].

Détails

  • Titre original : Pulse tube Stirling machine with warm gas-driven displacer.
  • Identifiant de la fiche : 2010-1014
  • Langues : Anglais
  • Source : Cryogenics - vol. 50 - n. 5
  • Date d'édition : 05/2010
  • DOI : http://dx.doi.org/10.1016/j.cryogenics.2010.01.011

Liens


Voir d'autres articles du même numéro (1)
Voir la source

Indexation