Résumé
The loading of heat transfer exchanger is increased with the development of technology and the increasing demand of energy. In order to improve the efficiency of compact heat exchanger and microchannel heat sinks, flow and heat transfer characteristics of Al2O3–water nanofluids in the microchannel with dimple and protrusion surface are investigated for the first time. The effects of nanoparticle volume fraction ? (0–3%), inlet velocity U (1.2–8.7 m s-1) and geometrical structure of microchannel on flow and heat transfer characteristics are studied in detail. Three similar microchannel structures are adopted in the present work, which were smooth, dimpled and dimpled + protrusioned microchannel. The results show that the relative Fanning friction factor f/f0, Nusselt number Nu/Nu0 and thermal performance TP increase with the increase of U for nanofluids. The flow structures change obviously as ? increases for the fixed microchannel structure and U. Flow separation and reattachment in the dimple does not contain two symmetrical focuses or single focus any more when U and ? are larger, and the locations of separation and reattachment show the trend of drawing close, so the size of separation bubble decreases. Moreover, in the microchannel with staggered dimple and protrusion, the asymmetric flow pattern is weakened. Meanwhile, average wall temperature decreases with the increase of ?, indicating heat transfer augment is obtained. From the analysis of performance evaluation plot, the proposed cases are energy saving. Furthermore, the effects of U and geometrical structure on the flow field and heat transfer performance are weakened due to the introduction of nanofluids in the microchannel heat sinks.
Détails
- Titre original : Heat transfer and flow analysis of Al2O3–water nanofluids in microchannel with dimple and protrusion.
- Identifiant de la fiche : 30011531
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 73
- Date d'édition : 06/2014
- DOI : http://dx.doi.org/10.1016/j.ijheatmasstransfer.2014.02.042
Liens
Voir d'autres articles du même numéro (12)
Voir la source
Indexation
-
Nanofluids heat transfer through a double pipe ...
- Auteurs : LUCIU R. S., GHERASIM I., CHERECHES N. C.
- Date : 12/2011
- Langues : Anglais
- Source : Scientific Journal of the Technical University of Civil Engineering Bucharest, Mathematical Modelling in civil Engineering - vol. 7 - n. 4
Voir la fiche
-
Improving the cooling performance of automobile...
- Auteurs : PEYGHAMBARZADEH S. M., HASHEMABADI S. H., SEIFI JAMNANI M., et al.
- Date : 07/2011
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 31 - n. 10
Voir la fiche
-
Entropy generation due to flow and heat transfe...
- Auteurs : SINGH P. K., ANOOP K. B., SUNDARARAJAN T., et al.
- Date : 10/2010
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 53 - n. 21-22
Voir la fiche
-
Effect of capillary pumping in application to r...
- Auteurs : KARWACKI J., BUTRYMOWICZ D., LACKOWSKI M.
- Date : 02/09/2013
- Langues : Anglais
- Source : Compressors 2013: 8th International Conference on Compressors and Coolants.
- Formats : PDF
Voir la fiche
-
Measurement and modelling of condensation heat ...
- Auteurs : AGARWAL A., BANDHAUER T. M., GARIMELLA S.
- Date : 09/2010
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 33 - n. 6
- Formats : PDF
Voir la fiche