Document IIF
Transfert de chaleur lors de l'évaporation de R22 et de R407C mélangés avec de l'huile dans un tube à micro-ailettes avec un coude en U.
Evaporation heat transfer for R22 and R407C refrigerant-oil mixture in a microfin tube with a U-bend.
Résumé
Evaporation heat transfer experiments for two refrigerants, R407C and R22, mixed with polyol ester and mineral oils were performed in straight and U-bend sections of a microfin tube. Experimental parameters include an oil concentration varied from 0 to 5%, an inlet quality varied from 0.1 to 0.5, two mass fluxes of 219 and 400 kg/(m2.s) and two heat fluxes of 10 and 20 kW/m2. Pressure drop in the test section increased by approximately 20% as the oil concentration increased from 0 to 5%. Enhancement factors decreased as oil concentration increased under inlet quality of 0.5, mass flux of 219 kg/(m2.s), and heat flux of 10 kW/m2, whereas they increased under inlet quality of 0.1, mass flux of 400 kg/(m2.s), and heat flux of 20 kW/m2. The local heat transfer coefficient at the outside curvature of an U-bend was larger than that at the inside curvature of a U-bend, and the maximum value occurred at the 90° position of the U-bend. The heat transfer coefficient was larger in a region of 30 tube diameter length at the second straight section than that at the first straight section.
Documents disponibles
Format PDF
Pages : 219-231
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Evaporation heat transfer for R22 and R407C refrigerant-oil mixture in a microfin tube with a U-bend.
- Identifiant de la fiche : 2000-2452
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 23 - n. 3
- Date d'édition : 05/2000
Liens
Voir d'autres articles du même numéro (6)
Voir la source
Indexation
- Thèmes : Transfert de masse
- Mots-clés : Coefficient de transfert de chaleur; Surface augmentée; Tube microailette; Mesure; Transfert de masse; Tube; Transfert de chaleur; Coude; Ébullition
-
Advanced micro-fin tubes for evaporation.
- Auteurs : CHAMRA L. M., WEBB R. L.
- Date : 06/1996
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 39 - n. 9
Voir la fiche
-
Advanced micro-fin tubes for condensation.
- Auteurs : CHAMRA L. M., WEBB R. L.
- Date : 06/1996
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 39 - n. 9
Voir la fiche
-
R404A condensing under forced flow conditions i...
- Auteurs : INFANTE FERREIRA C. A., NEWELL T. A., CHATO J. C., et al.
- Date : 06/2003
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 26 - n. 4
- Formats : PDF
Voir la fiche
-
Effects of fin shape on condensation in herring...
- Auteurs : MIYARA A., OTSUBO Y., OHTSUKA S., et al.
- Date : 06/2003
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 26 - n. 4
- Formats : PDF
Voir la fiche
-
Horizontal flow boiling of R22 and R407C in a 9...
- Auteurs : KUO C. S., WANG C. C.
- Date : 08/1996
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 16 - n. 8-9
Voir la fiche