Transfert de chaleur turbulent et chute de pression dans un tube garni d'un ruban torsadé et dentelé.
Turbulent heat transfer and pressure drop in tube fitted with serrated twisted tape.
Auteurs : CHANG S. W., JAN Y. J., LIOU J. S.
Type d'article : Article
Résumé
This paper presents an original experimental study on compound heat transfer enhancement in a tube fitted with serrated twisted tape. The serrations on two sides of the twisted tape with twist ratio of 1.56, 1.88, 2.81 or infinite are the square-sectioned ribs with the identical rib-pitch and rib-height. The local Nusselt number and Fanning friction factor increase as the twist ratio decreases in the tube fitted with smooth or serrated twisted tape. In the Re range of 5000-25 000, heat transfer augmentation attributed to the serrated twisted tape falls in the range of 250-480% of the plain-tube level. That is about 1.25-1.67 times the heat transfer level in the tube fitted with smooth twisted tape. Fanning friction factors are respectively decreased and increased in the tubes fitted with smooth and serrated twisted tapes as Re increases. Based on the same pumping power consumption, the thermal performances of the tubes with smooth and serrated twisted tapes are compared. A set of empirical correlations that permits the evaluation of the Nusselt number and the Fanning friction factor in the developed flow region for the tubes fitted with smooth and serrated twisted tapes is generated for engineering applications. [Reprinted with permission from Elsevier. Copyright, 2006].
Détails
- Titre original : Turbulent heat transfer and pressure drop in tube fitted with serrated twisted tape.
- Identifiant de la fiche : 2007-1976
- Langues : Anglais
- Source : International Journal of thermal Sciences - vol. 46 - n. 5
- Date d'édition : 05/2007
Liens
Voir d'autres articles du même numéro (1)
Voir la source
Indexation
- Thèmes : Transfert de chaleur
- Mots-clés : Géometrie; Surface augmentée; Tube; Transfert de chaleur; Experimentation; Échangeur de chaleur; Chute de pression
-
Compound heat transfer enhancement of a converg...
- Auteurs : HONG M., DENG X., LI Z.
- Date : 21/08/2007
- Langues : Anglais
- Source : ICR 2007. Refrigeration Creates the Future. Proceedings of the 22nd IIR International Congress of Refrigeration.
- Formats : PDF
Voir la fiche
-
Evaporation and condensation heat transfer char...
- Auteurs : FUJINO H., YOSHIOKA S., KASAI K., et al.
- Date : 04/12/2002
- Langues : Anglais
- Source : Green breeze from Asia: frontiers of refrigerants, heat transfer and system.. ACRA-2002. Proceedings of the Asian conference on refrigeration and air conditioning.
Voir la fiche
-
Performance evaluation of fluted tube heat exch...
- Auteurs : CHRISTENSEN R. N., SAXENA P.
- Date : 1993
- Langues : Anglais
- Source : ASHRAE Transactions 1993.
Voir la fiche
-
EFFECT OF INLET, EXIT, AND FIN GEOMETRY ON PIN ...
- Auteurs : SPARROW E. M., SUOPYS A. P., ANSARI M. A.
- Date : 07/1984
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 27 - n. 7
Voir la fiche
-
Zlozone (kombinowane) metody intensyfikacji kon...
- Auteurs : PLOCEK M., ZAWADZKI A.
- Date : 08/2007
- Langues : Polonais
- Source : Chlodnictwo - vol. 42 - n. 8
Voir la fiche