Une approche de modélisation thermodynamique d’une chambre pour les compresseurs double vis à injection d’huile et sans huile.
A thermodynamic chamber modelling approach for oil free and oil injected twin screw compressors.
Numéro : A1-160
Auteurs : RAMCHANDRAN G., HARRISON J.
Résumé
As computational modelling becomes an increasingly reliable and key component in accelerating the design process for twin screw machines, the goals for engineers now include developing faster running and physically accurate component models to optimize machine performance and efficiency, minimize internal leakage, reduce unwanted noise and pulsations, and properly size bearing supports in the machine. Accurately capturing these aspects via physical models helps in analyzing operating points that were not tested as well as in understanding how the machine will perform in a surrounding system. Thereafter, engineers can find an optimal design in a timely manner for the fastest speed to market as well as reduce physical testing to keep development costs low. This paper presents the use of a multi-physics modelling platform - GT-SUITE - in conjunction with SCORG – a well-established tool for the design and analysis of twin screw machines – to explore meeting the aforementioned goals. Two case studies are presented for a 3/5 oil free air compressor and a 4/5 oil injected air compressor. Comparisons to the mass flow rates of the gas and oil, temperatures, indicated power and the instantaneous chamber pressure vs rotation angle were made against test data available from the Centre for Compressor Technology at City University. The sensitivity of oil injection timing on the discharge temperature and power is shown and an optimum timing was found. The validated chamber models may be integrated into a system as well as used for further optimization to improve the original compressor performance.
Documents disponibles
Format PDF
Pages : 10
Disponible
Gratuit
Détails
- Titre original : A thermodynamic chamber modelling approach for oil free and oil injected twin screw compressors.
- Identifiant de la fiche : 30028727
- Langues : Anglais
- Sujet : Technologie
- Source : 12th International Conference on Compressors and their Systems
- Date d'édition : 09/2021
- Document disponible en consultation à la bibliothèque du siège de l'IIF uniquement.
Liens
Voir d'autres communications du même compte rendu (63)
Voir le compte rendu de la conférence
Indexation
-
Thèmes :
Compresseurs;
Mesures thermodynamiques - Mots-clés : Modélisation; Compresseur sec; Compresseur à vis; Propriété thermodynamique; Étude de cas; Huile; Injection
-
Experimental quantification of the thermodynami...
- Auteurs : SARAVANA A., LIU H., GROLL E. A., ZIVIANI D.
- Date : 15/07/2022
- Langues : Anglais
- Source : 2022 Purdue Conferences. 26th International Compressor Engineering Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Numerical evaluation of an oil free screw compr...
- Auteurs : TANKHIWALE S., DAGWAR A., RANE S., KOVACEVIC A., BIRARI A., ABDAN S., ASATI N.
- Date : 09/2021
- Langues : Anglais
- Source : 12th International Conference on Compressors and their Systems
- Formats : PDF
Voir la fiche
-
Analysis and calculation of leakage in oil-floo...
- Auteurs : HAN J.
- Date : 16/08/1997
- Langues : Anglais
- Source : Proceedings of the '97 International Compressor Technique Conference.
Voir la fiche
-
Theoretical analysis and experimental validatio...
- Auteurs : DIAO A., TAO J., FENG M., et al.
- Date : 20/07/2017
- Langues : Anglais
- Source : 8th international conference on compressors and refrigeration, 2017.
- Formats : PDF
Voir la fiche
-
Application of computational fluid dynamics to ...
- Auteurs : HSIEH S. H., ZHANG J. W., HUANG C. S.
- Date : 05/2021
- Langues : Anglais
- Source : 2021 Purdue Conferences. 25th International Compressor Engineering Conference at Purdue.
- Formats : PDF
Voir la fiche