Partager

Une étude numérique sur les évaporateurs à minicanaux et à microcanaux munis d'ailettes persiennées : étude de la performance hydraulique et thermique de nouveaux mélanges de frigorigènes.

A numerical study of minichannel and microchannel evaporators with louvered fins: investigating the thermal-hydraulic performance of new refrigerant mixtures.

Numéro : pap. 2390

Auteurs : GOSSARD J. J., HAN X., RAMALINGAM M., et al.

Résumé

The need for more compact and more efficient heat exchangers in the aerospace, automotive, and HVAC&R industries has led to the development of heat exchangers that utilize minichannel or microchannel tubes coupled with louvered fins. In this study, a finite volume, steady-state evaporator model that includes rectangular minichannel and microchannel tubes with louvered fins and headers was developed and validated in Matlab. The model provides the user with the option to select from multiple published correlations for calculating the air-side and refrigerant-side heat transfer and pressure drop within each control volume. The average error between the predicted and actual cooling capacity for these four studies was 8.54, 12.62, 4.94 and 7.93%, respectively, with an average deviation of 8.5% (n = 29). It should also be noted that the range of examined cooling capacities in this validation was fairly large (i.e. 325 to 40,850 W), and the simulation under-predicted the cooling capacity with approximately the same frequency as it over-predicted it. The model was then used to explore the thermal-hydraulic performance of two ternary refrigerant mixtures—namely, R125/R32/R161 (34%/15%/51%) versus R22 and R125/R143a/R161 (45%/40%/15%) versus R404A. The physical properties of these refrigerant mixtures were estimated using REFPROP 9.0 and (where possible) verified by actual experimental property data. Constant mass flux conditions of 60, 80 and 100 kg/m2s were used for these simulations. It was found that the heat transfer rate per surface area of the simulated evaporator containing R125/R32/R161 (34%/15%/51%) was more than 58% higher than that of R22 for the same mass flux for 1.7 mm < Dh < 3.7 mm. The refrigerant-side pressure drop of this mixture was also simulated over this range of Dh and found to be comparable to the pressure drop for R22 at 60 kg/m2s and only slightly higher than R22 at 80 and 100 kg/m2s.

Documents disponibles

Format PDF

Pages : 10 p.

Disponible

  • Prix public

    20 €

  • Prix membre*

    15 €

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : A numerical study of minichannel and microchannel evaporators with louvered fins: investigating the thermal-hydraulic performance of new refrigerant mixtures.
  • Identifiant de la fiche : 30007142
  • Langues : Anglais
  • Source : 2012 Purdue Conferences. 14th International Refrigeration and Air-Conditioning Conference at Purdue.
  • Date d'édition : 16/07/2012

Liens


Voir d'autres communications du même compte rendu (195)
Voir le compte rendu de la conférence

Indexation