Document IIF
Wetting and heat and mass transfer at structured vertical heat exchanger plates for compact absorption heat pumps.
Auteurs : LEX T., SCHWEIGLER C.
Type d'article : Article de la RIF
Résumé
To investigate the wetting behavior of structured heat exchanger plates, a test rig has been developed and applied for an experimental analysis. The test rig comprises a pair of heat exchanger plates within a vacuum tight plexiglass chamber, allowing for visual observation of the wetting behavior of the falling film on the heat exchanger surface under subatmospheric pressures. The test rig can be operated with either water as working fluid, for examining the two heat exchanger sections functioning as evaporator and condenser, or with water/lithium bromide solution for operation as generator and absorber. In this study, the test rig was operated as a generator/ absorber pair to analyze the wetting behavior of lithium bromide solution at concentrations of 42% and 52% on a stainless-steel plate with two different horizontal capillary structures measuring 0.5mm and 1.0 mm. Stable wetting of the heat exchanger surface has been observed for both capillary structures across all operating conditions. Specifically, the 52% 𝐿𝑖𝐵𝑟 solution achieves heat transfer coefficients as high as 450 W/(m2 K) during absorption, while the 42% 𝐿𝑖𝐵𝑟 solution reaches coefficients up to 600 W/(m2 K) for the investigated distribution rates ranging from 0.006 to 0.02 l/(m s). After adding a surface-active additive, a wavy flow pattern is induced that promotes mixing and diffusion within the film leading to a further increase of the heat transfer coefficient
to 1200 W/(m2 K).
Documents disponibles
Format PDF
Pages : 10 p.
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Wetting and heat and mass transfer at structured vertical heat exchanger plates for compact absorption heat pumps.
- Identifiant de la fiche : 30035323
- Langues : Anglais
- Sujet : Technologie
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 190
- Date d'édition : 10/2026
- DOI : http://dx.doi.org/https://doi.org/10.1016/j.ijrefrig.2026.107047
Liens
Voir d'autres articles du même numéro (29)
Voir la source
-
SAVE BY ABSORPTION HEAT PUMPING.
- Auteurs : DAVIDSON W. F., CAMPAGNE W.
- Date : 1987
- Langues : Anglais
- Source : Hydrocarbon Processing - vol. 66 - n. 12
Voir la fiche
-
WATER ABSORPTION BY A SOLUTION OF LITHIUM BROMI...
- Auteurs : GABSI S., BUGAREL R.
- Date : 1983
- Langues : Anglais
- Source : Int. Commun. Heat Mass Transf. - vol. 10 - n. 1
Voir la fiche
-
PERFORMANCE OF AN EXPERIMENTAL ABSORPTION HEAT ...
- Auteurs : PATASKAR S. G.
- Date : 1990
- Langues : Anglais
- Source : Ind. eng. Chem. Res. - vol. 29 - n. 8
Voir la fiche
-
Study on a design method for hybrid ground heat...
- Auteurs : WEI K., LI W., LI J., et al.
- Date : 04/2017
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 76
- Formats : PDF
Voir la fiche
-
SOLUTIONS POUR LES POMPES A CHALEUR A ABSORPTION.
- Auteurs : GAZINSKI B.
- Date : 1983
- Langues : Polonais
- Source : Chlodnictwo - vol. 18 - n. 5
Voir la fiche