Amélioration de la conductivité thermique du mélange d’enduit utilisé dans les systèmes de pompes à chaleur géothermiques.
Improvement of thermal conductivity of grout mixture for geothermal heat pump systems.
Numéro : pap. 2351
Auteurs : MAATOUK C.
Résumé
A vertical geothermal probe consists of two or four polyethylene tubes U-shaped, used for circulating the coolant between the heat pump and the ground. It is installed in a deep borehole and sealed in a special grout, a kind of liquid cement, used to seal the borehole, and avoid the presence of air bags between the probe and the ground. Moreover, the grout provides a heat transfer medium between the geothermal probe and surrounding. The main cost in a geothermal installation is drilling itself. Reducing the heat exchanger length, and thus reducing the depth of the borehole is an interesting solution to reduce the cost of the installation. The conventional cement grout has low thermal conductivity varying between 0,8 and 1 W/m.K, which leads to high heat exchanger length. Increasing this thermal conductivity, permit the improvement the heat transfer between the soil and the probe, thus reducing the heat exchanger length. Laboratory studies were undertaken to determine the thermal conductivity of various grout mixture. Such as cementitious grout with bentonite, silica sand and graphite. A thermal modeling of the soil, the grout and the heat exchanger was conducted. Experimental results shows that thermal conductivity of the grout can be increased up to 4 W/m.K. The simulation results shows that the reduction in required borehole length was predicted theoretically for an example heat pump system and found to reach 20%, depending on the soil thermal conductivity and borehole diameter.
Documents disponibles
Format PDF
Pages : 8 p.
Disponible
Prix public
20 €
Prix membre*
15 €
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Improvement of thermal conductivity of grout mixture for geothermal heat pump systems.
- Identifiant de la fiche : 30018918
- Langues : Anglais
- Source : 2016 Purdue Conferences. 16th International Refrigeration and Air-Conditioning Conference at Purdue.
- Date d'édition : 11/07/2016
Liens
Voir d'autres communications du même compte rendu (274)
Voir le compte rendu de la conférence
Indexation
-
Mesoscopic study of the effective thermal condu...
- Auteurs : CAI S., ZHANG B., CUI T., et al.
- Date : 02/2019
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 98
- Formats : PDF
Voir la fiche
-
Improvement of efficiency of a geothermal heat ...
- Auteurs : AZAR P., MAATOUK C.
- Date : 24/08/2019
- Langues : Anglais
- Source : Proceedings of the 25th IIR International Congress of Refrigeration: Montréal , Canada, August 24-30, 2019.
- Formats : PDF
Voir la fiche
-
Experimental investigation of thermophysical pr...
- Auteurs : IGNATOWICZ M., PALM B.
- Date : 07/2024
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 163
- Formats : PDF
Voir la fiche
-
Characterization of Ground Thermal Conditions f...
- Auteurs : WANG W., WANG G., LIU F., LIU C.
- Date : 10/2022
- Langues : Anglais
- Source : Energies - vol. 15 - n. 19
- Formats : PDF
Voir la fiche
-
Heat pumps architecture optimization for enhanc...
- Auteurs : APOSTOLOU M., SALAME S., BARRAULT S., et al.
- Date : 11/07/2016
- Langues : Anglais
- Source : 2016 Purdue Conferences. 16th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
Voir la fiche