Résumé
The Brayton refrigeration air cycle for electroplating wastewater treatment can achieve 100% recovery of water, but there is air condensation during the expansion, which can damage the expander. In order to avoid the harmful air condensation during the expansion, an improved Brayton refrigeration air cycle coupled with a reheater and an improved Brayton refrigeration air cycle using a solar collector for electroplating wastewater treatment are developed in this paper. For these two new systems, as the solar collector or reheater is used to heat the air at the outlet of the chiller, there is no air condensation during the expansion. When the wastewater needs to be treated by the air with low temperature, the reheater can be used at the outlet of the compressor to heat the air after the condensation dehumidification, which can increase the system efficiency ratio and exergy efficiency to 1.21 kg/(kW h) and 70.7%, respectively. When the wastewater needs to be treated by the air with high temperature, the solar collector can be used to heat the air after the condensation dehumidification, which can increase the air temperature at the inlet of the tower and system efficiency ratio to 163.6 °C and 2.18 kg/(kW h), respectively.
Documents disponibles
Format PDF
Pages : 219-232
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Improvement of Brayton refrigeration air cycle for electroplating wastewater treatment.
- Identifiant de la fiche : 30032053
- Langues : Anglais
- Sujet : Technologie
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 155
- Date d'édition : 11/2023
- DOI : http://dx.doi.org/10.1016/j.ijrefrig.2023.09.010
Liens
Voir d'autres articles du même numéro (32)
Voir la source
Indexation
-
An open reversed Brayton cycle with regeneratio...
- Auteurs : HOU S., ZHANG H.
- Date : 01/2009
- Langues : Anglais
- Source : International Journal of thermal Sciences - vol. 48 - n. 1
Voir la fiche
-
Comparison of mean-line design methods on match...
- Auteurs : YANG Y., SHENG C., LUO G., CHEN S., HOU Y., CHEN L.
- Date : 01/2023
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 145
- Formats : PDF
Voir la fiche
-
Comparison of the optimum performances of the i...
- Auteurs : ZHANG Y., CHEN J., HE J., et al.
- Date : 02/2007
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 27 - n. 2-3
Voir la fiche
-
Thermodynamic investigation of a centrifugal re...
- Auteurs : WANG L., LI H., ZHOU J.
- Date : 08/2023
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 152
- Formats : PDF
Voir la fiche
-
Thermodynamic analysis of hybrid heat source dr...
- Auteurs : ASHWNI, SHERWANI A. F.
- Date : 09/2021
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 129
- Formats : PDF
Voir la fiche