Document IIF
Comparaison des méthodes de conception par ligne médiane sur les caractéristiques d'adaptation de trois roues coaxiales dans un système de régulation de l'environnement d'un avion.
Comparison of mean-line design methods on matching characteristics of three coaxial-impellers in an aircraft environmental control system.
Résumé
High-speed turbo-cooler of coaxial expander-compressor is a promising solution for reverse Brayton cycle refrigeration systems to improve compactness, power recovery and efficiency. The performance curves of coaxial impellers are crucial for their matching characteristics as well as the system efficiency under off-design conditions. In this paper, three mean-line methods for the design of high-speed turbo-coolers are evaluated by comparing the matching characteristics of three coaxial-impellers, including the specific speed and characteristic ratio (SS-CR) approach, the power ratio (PR) approach and velocity coefficient (VC) approach. A coupling model is established to predict the off-design performance of turbo-cooler and the system size. The results show that the rotating speed and mass flow rate by all three methods lie within 2% of each other. At the design point, SS-CR approach gives 84.0% expander efficiency compared to 83.0% by PR approach and 80.9% by VC approach, but the PR approach has better performance at speeds below 35 krpm. The system volume is the lowest at the aspect ratio of 1.5 of the heat exchanger designed with all the three methods. However, SS-CR gives 6.0% advantage in system volume 5.6% over VC approach and 3.7% over PR approach. When the cooling capacity is controlled at 2000 W, SS-CR approach gives 79.3% expander efficiency compared to 78.9% by PR approach and 76.4% by VC approach.
Documents disponibles
Format PDF
Pages : 377-387
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Comparison of mean-line design methods on matching characteristics of three coaxial-impellers in an aircraft environmental control system.
- Identifiant de la fiche : 30030824
- Langues : Anglais
- Sujet : Technologie
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 145
- Date d'édition : 01/2023
- DOI : http://dx.doi.org/10.1016/j.ijrefrig.2022.09.016
Liens
Voir d'autres articles du même numéro (45)
Voir la source
Indexation
-
Energy and exergy based impact of avionics ther...
- Auteurs : HEDSPETH J. T.
- Date : 12/2020
- Langues : Anglais
- Formats : PDF
Voir la fiche
-
Numerical study of the part load operation for ...
- Auteurs : JENDE E., KABAT N., STATHOPOULOS P.
- Date : 15/05/2023
- Langues : Anglais
- Source : 14th IEA Heat Pump Conference 2023, Chicago, Illinois.
- Formats : PDF
Voir la fiche
-
Part Load Capability of a High Temperature Heat...
- Auteurs : OEHLER J., GOLLASCH J., TRAN P. A., NICKE E.
- Date : 31/08/2021
- Langues : Anglais
- Source : 13th IEA Heat Pump Conference 2021: Heat Pumps – Mission for the Green World. Conference proceedings [full papers]
- Formats : PDF
Voir la fiche
-
Study on the coupled characteristics of high-sp...
- Auteurs : YANG X., CHEN L., WANG Z., CHEN S., HOU Y.
- Date : 03/2023
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 147
- Formats : PDF
Voir la fiche
-
A review of reverse Brayton air cycle refrigera...
- Auteurs : LIU S., MA G., XU S., GONG Y., JIA X., WU G.
- Date : 06/2023
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 150
- Formats : PDF
Voir la fiche