Partager

Document IIF

Analyse CFD des écoulements transitoires dans un compresseur linéaire avec un modèle couplé unidimensionnel par mécanique numérique des fluides.

CFD analysis of transient flows in a linear compressor using a 1D-CFD coupled model.

Auteurs : HWANG I. S., LEE Y. L.

Type d'article : Article, Article de la RIF

Résumé

In refrigerant compressors, superheat is one of the main factors affecting compressor performance. To accurately predict superheat, a transient conjugate heat transfer model using a moving mesh should be used, but the computation time is too long to be practical. Therefore, 1-dimensional (1D) lumped model, which requires calibration with experimental data, has mainly been used for predicting temperature in the suction system. Recently, a coupled model combining a transient 1D lumped model and a steady state CFD model, which does not require experimental data, was developed. However, the coupled model had about 15% error when predicting the suction system temperatures of a linear compressor, since it only included the transient effects of the cylinder flow. Thus, in this paper, we developed a transient model that uses the temperature of solid parts in the coupled model's results as the wall boundary condition, to reduce computation time. In addition, momentum sources were used to describe the flow between the internal body and the compressor housing caused by internal body vibration. Using this transient model with the momentum sources, we predicted the suction system temperature to within about 5% error at maximum, significantly improving the accuracy of the previous coupled model.

Documents disponibles

Format PDF

Pages : 20-27

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : CFD analysis of transient flows in a linear compressor using a 1D-CFD coupled model.
  • Identifiant de la fiche : 30023985
  • Langues : Anglais
  • Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 91
  • Date d'édition : 07/2018
  • DOI : http://dx.doi.org/10.1016/j.ijrefrig.2018.04.015

Liens


Voir d'autres articles du même numéro (25)
Voir la source

Indexation