Résumé
Two-phase thermosyphon loop (TPTL) has been widely used in industrial applications for energy conservation. However, the circulation of two-phase thermosyphon depends on the gravity, and the condenser must be higher than the evaporator by a certain height, which brings about significant difficulties in design and application. In this paper, a self-driven loop heat pipe (SDLHP) without the assistance of gravity is proposed. The working principle of SDLHP is described, and a performance simulation model has been developed. Based on the model, heat transfer rate, mass flux, the mass distribution of the working fluid, thermal resistance distribution and the flow parameters along the loop of SDLHP are simulated and compared to a traditional TPTL without height difference. The simulation results show, compared to the traditional TPTL without height difference, by utilizing the thermal potential difference between the heat source and the heat sink to generate driving force, SDLHP can enhance the circulation flow to optimize the refrigerant distribution in the evaporator and the condenser, and the heat performance improves significantly. Meanwhile, based on a theoretical analysis, the proposed SDLHP is thermodynamically feasible. Because of no need for the height difference, the SDLHP greatly expands the application of heat pipes in various industrial applications.
Documents disponibles
Format PDF
Pages : 10
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : A new self-driven loop heat pipe used in HVAC systems: feasibility analysis.
- Identifiant de la fiche : 30026452
- Langues : Anglais
- Source : Proceedings of the 25th IIR International Congress of Refrigeration: Montréal , Canada, August 24-30, 2019.
- Date d'édition : 24/08/2019
- DOI : http://dx.doi.org/10.18462/iir.icr.2019.0533
Liens
Voir d'autres communications du même compte rendu (632)
Voir le compte rendu de la conférence
Indexation
-
Numerical simuation of two-phase flow distribut...
- Auteurs : CHOI S., LEE H., JEONG J.
- Date : 31/08/2021
- Langues : Anglais
- Source : 13th IEA Heat Pump Conference 2021: Heat Pumps – Mission for the Green World. Conference proceedings [full papers]
- Formats : PDF
Voir la fiche
-
Analysis and quantification of generated bubble...
- Auteurs : YANG C., HRNJAK P.
- Date : 24/08/2019
- Langues : Anglais
- Source : Proceedings of the 25th IIR International Congress of Refrigeration: Montréal , Canada, August 24-30, 2019.
- Formats : PDF
Voir la fiche
-
Numerical investigation of HFC-134a flow throug...
- Auteurs : KALEEM KHAN M., KUMAR R., KUMAR SAHOO P.
- Date : 21/08/2007
- Langues : Anglais
- Source : ICR 2007. Refrigeration Creates the Future. Proceedings of the 22nd IIR International Congress of Refrigeration.
- Formats : PDF
Voir la fiche
-
Quality measurement of two phase flow with plug...
- Auteurs : FUKUTA M., MIYATA S., MOTOZAWA M., et al.
- Date : 09/07/2018
- Langues : Anglais
- Source : 2018 Purdue Conferences. 17th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
Voir la fiche
-
PRESSURE DROP IN PIPE COMPONENTS IN REFRIGERANT...
- Auteurs : NORSTEBO A., BRENDENG E.
- Date : 10/08/1991
- Langues : Anglais
- Source : New challenges in refrigeration. Proceedings of the XVIIIth International Congress of Refrigeration, August 10-17, 1991, Montreal, Quebec, Canada.
- Formats : PDF
Voir la fiche