Partager

Analyse de la performance d’un cycle à absorption double effet pour la production d’électricité et de froid avec un mélange ammoniac/nitrate de lithium.

Performance analysis of an absorption double-effect cycle for power and cold generation using ammonia/lithium nitrate.

Auteurs : VENTAS R., LECUONA A., VEREDA C., et al.

Type d'article : Article

Résumé

The performance of a two-stage double-effect absorption machine for combined power and cold generation is proposed and studied theoretically, generating innovative schemes. The ammonia/lithium nitrate solution allows this cycle, consuming either solar thermal or residual heat. The machine is represented by means of a thermodynamic steady-state cycle. First, only power generation and only cold production are separately studied as function of the main internal temperatures, introducing the concepts of mixed and unmixed vapour and of virtual temperatures for allowing comparison. The results indicate that for producing power the efficiency of the cycle increases when rising the maximum pressure while for producing cold is the contrary. The maximum efficiency obtained for only power production with no superheating is 19.5% at a high generation temperature of 173 °C and at a moderate 20.3 bars of maximum pressure. The solution crystallization avoids a higher efficiency. The combined power and cooling cycle allows adapting the energy production to cold demand or to power demand by splitting the vapour generated. At a generation temperature of 132 °C, when splitting the vapour generated into half for power and half for cooling, the cycle obtains an electric efficiency of 6.5% and a COP of 0.52. This cycle is compared to a conventional double-effect cycle configured in parallel flow, obtaining the same electric efficiency but with a 32% higher COP.

Détails

  • Titre original : Performance analysis of an absorption double-effect cycle for power and cold generation using ammonia/lithium nitrate.
  • Identifiant de la fiche : 30021165
  • Langues : Anglais
  • Source : Applied Thermal Engineering - vol. 115
  • Date d'édition : 25/03/2017
  • DOI : http://dx.doi.org/10.1016/j.applthermaleng.2016.12.102

Liens


Voir d'autres articles du même numéro (31)
Voir la source

Indexation