Aptitude à la modélisation de R-134a pour un flux thermique critique d'eau dans une géométrie à faisceaux de 5 x 5.

Modelling capability of R-134a for a critical heat flux of water in a vertical 5 x 5 rod bundle geometry.

Auteurs : AKHTAR S. W., MOON S. K., CHUN S. Y., et al.

Type d'article : Article

Résumé

Critical heat flux (CHF) tests have been performed for a vertically upward R-134a flow in a 5 x 5 rod bundle in the following parameter ranges: outlet pressure 1.5-3.0 MPa, mass flux 50-2500 kg/m2.s, inlet quality -0.08 to -0.75 and critical quality -0.17 to 1.58. Parametric trends of the CHF data agree well with the general understanding. Water equivalent CHF data is generated using a set of well-established modelling parameters, then compared with (a) the EPRI/Colombia University's water CHF database for similar geometry and experimental conditions and (b) commonly used CHF prediction methods. The water equivalent CHF data generated from the present tests shows a good agreement with the actual water CHF data for both Katto's and Ahmad's modelling methods when considering the differences in the detailed geometric and flow conditions. They are also predicted well by the 1995 CHF look-up table. These results indicate that R134a can be a good modelling fluid for the CHF of water in rod bundles at least in the investigated parameter ranges. [Reprinted with permission from Elsevier. Copyright, 2005].

Détails

  • Titre original : Modelling capability of R-134a for a critical heat flux of water in a vertical 5 x 5 rod bundle geometry.
  • Identifiant de la fiche : 2007-0527
  • Langues : Anglais
  • Source : International Journal of Heat and Mass Transfer - vol. 49 - n. 7-8
  • Date d'édition : 04/2006

Liens


Voir d'autres articles du même numéro (10)
Voir la source