Partager

Document IIF

Caractéristiques d'atomisation des tuyères jumelles pour une application aux canons à neige extérieurs.

Atomization characteristics of twin nozzles for outdoor snow-makers application.

Auteurs : ZHANG B., WANG R., WU H., DONG P., XU R., XING M., CUI Z., YAN G., ZHANG H.

Type d'article : Article de la RIF

Résumé

Swirl nozzles are the core component of outdoor snow-makers for forming snow crystal artificially. A general experiment setup for simulating the atomization process at the working conditions of outdoor snow-makers was developed. Phantom high-speed camera and PW180-B laser particle size analyzer (LPSA) were used to capture the dynamic atomization process and droplet diameter distributions respectively. The atomization characteristics of a single swirl nozzle and that of twin nozzles were tested and analyzed. For single nozzle, Sauter Mean Diameter (SMD) drops rapidly and then goes up gently due to the action of droplets breakup and coalescence. With the increase of the injection pressure, the SMD of the droplets decreases, and the mass flow rate of the nozzles is improved. Moreover, the spray cone angle increases rapidly and keeps a stable value. For twin nozzles, the cooperation of the swirl nozzles obviously reduces the SMDs of the atomization field because it enhances the probability of droplets collision and separation. The SMDs are determined by the cooperative distances and injection pressure.

Documents disponibles

Format PDF

Pages : 60-69

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Atomization characteristics of twin nozzles for outdoor snow-makers application.
  • Identifiant de la fiche : 30029831
  • Langues : Anglais
  • Sujet : Technologie
  • Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 139
  • Date d'édition : 07/2022
  • DOI : http://dx.doi.org/10.1016/j.ijrefrig.2022.03.025

Liens


Voir d'autres articles du même numéro (19)
Voir la source

Indexation