Document IIF

Caractéristiques du transfert de chaleur et de masse du processus de déshumidification par déshydratant liquide avec coulis de matériau à changement de phase microencapsulé.

Heat and mass transfer characteristics of liquid desiccant dehumidification process with microencapsulated phase change material slurry.

Numéro : pap. n. 595

Auteurs : YAN Y., NIU X., LIU T., et al.

Résumé

It is expected that the temperature rise of solution in the liquid desiccant dehumidification process can be restrained by adding microencapsulated phase change materials (MicroPCMs) to the desiccant solution. The heat and mass transfer process of the falling film dehumidification with the microencapsulated phase change material slurry (MPCMS) were simulated. The influences of the concentration of MicroPCMs and the inlet temperature of the slurry on the dehumidification were investigated. The results show that, with the addition of MicroPCMs, the temperature rise in dehumidification process can be restrained. There is an optimum concentration of MicroPCMs to reach the peak value of interfacial mass transfer coefficient. When the concentration of MicroPCMs is 5%, the water condensation rate is 14.2% higher than that of the base fluid. It is recommended that the slurry inlet temperature be close to the onset melting temperature of MicroPCMs.

Documents disponibles

Format PDF

Pages : 8

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Heat and mass transfer characteristics of liquid desiccant dehumidification process with microencapsulated phase change material slurry.
  • Identifiant de la fiche : 30026009
  • Langues : Anglais
  • Source : Proceedings of the 25th IIR International Congress of Refrigeration: Montréal , Canada, August 24-30, 2019.
  • Date d'édition : 24/08/2019
  • DOI : http://dx.doi.org/10.18462/iir.icr.2019.0595

Liens


Voir d'autres communications du même compte rendu (632)
Voir le compte rendu de la conférence