Caractéristiques et optimisation d'une pompe à chaleur en cascade au R134a/R410A .
Characteristics of R134a/R410A cascade heat pump and optimization.
Numéro : pap. 2425
Auteurs : KIM D. H., PARK H. S., KIM M. S.
Résumé
Single stage air source heat pump has been widely used around the world. However, it has some drawback, for example, deteriorated heating capacity and COP in cold ambient temperature. To overcome these disadvantages, cascade cycle has been suggested and shows better performance at low ambient temperature. Cascade cycle has smaller compression ratio at each cycle and shows higher compression efficiency compared to that of single stage cycle. Intermediate pressure is most critical parameter which decides the system performance. There have been many research studies about cascade heat pump system using NH3/CO2 and C3H8/CO2 as refrigerants at high and low stage, respectively. Most studies conducted on system optimization, finding the optimal intermediate pressure. However, little information has given about the experimental optimization results. In this study, AWHP (air to water heat pump), which is composed by two single stage cycle, was studied experimentally. AWHP high and low cycle adopts R134a and R410A as refrigerants, respectively, because critical temperature of R134a is higher than R410A. Since there are two single stage cycles, each cycle has a different compression ratio. In this research, by introducing numerical analysis, system optimization was studied. Characteristics of cascade cycle with respect to each compressor have been also studied. Experiment was conducted with various operating conditions; ambient temperature, water inlet temperature.
Documents disponibles
Format PDF
Pages : 7 p.
Disponible
Prix public
20 €
Prix membre*
15 €
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Characteristics of R134a/R410A cascade heat pump and optimization.
- Identifiant de la fiche : 30006391
- Langues : Anglais
- Source : 2012 Purdue Conferences. 14th International Refrigeration and Air-Conditioning Conference at Purdue.
- Date d'édition : 16/07/2012
Liens
Voir d'autres communications du même compte rendu (195)
Voir le compte rendu de la conférence
Indexation
-
Thèmes :
Techniques des pompes à chaleur;
HFC - Mots-clés : R410A; R134a; Air-eau; Pompe à chaleur; Performance; Optimisation; Système en cascade; Experimentation; Frigorigène
-
Performance optimization of a cascade multifunc...
- Auteurs : JUNG H. W., KANG H., CHUNG H., et al.
- Date : 06/2014
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 42
- Formats : PDF
Voir la fiche
-
Performance comparison between a single-stage a...
- Auteurs : JUNG H. W., KANG H., YOON W. J., et al.
- Date : 08/2013
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 36 - n. 5
- Formats : PDF
Voir la fiche
-
Sélection de frigorigènes pour une pompe à chal...
- Auteurs : ZHAO H., YANG Z.
- Date : 10/2012
- Langues : Chinois
- Source : Journal of Refrigeration - vol. 33 - n. 147
- Formats : PDF
Voir la fiche
-
Development of high performance heat pump syste...
- Auteurs : HASEGAWA H., SAIKAWA M., HASHIMOTO K., IWATSUBO T.
- Date : 22/09/1996
- Langues : Anglais
- Source : Heat pumping technologies towards the next century: applications and markets. Proceedings of the 5th IEA Conference.
Voir la fiche
-
Experiment on the performance of an auto-cascad...
- Auteurs : LIU J., ZHANG Z., XU X., et al.
- Date : 21/08/2007
- Langues : Anglais
- Source : ICR 2007. Refrigeration Creates the Future. Proceedings of the 22nd IIR International Congress of Refrigeration.
- Formats : PDF
Voir la fiche