Caractéristiques hydrauliques et thermiques d'échangeurs de chaleur à plaques brasées. II. Recherches actuelles sur les évaporateurs chez KTH.
Thermal and hydraulic characteristics of brazed plate heat exchangers. II. Current research on evaporators at KTH.
Auteurs : CLAESSON J.
Résumé
The paper summarizes recent research on plate heat exchangers used as evaporators in domestic heat pumps and refrigeration systems, carried out at the Royal Institute of Technology (KTH), Sweden. The investigations have been focusing on issues relevant to the performance and to parameters influencing the performance for the application in mind. Thus, the adiabatic pressure drop in a plate heat exchanger has been investigated and a new correlation is suggested. The boiling section heat transfer coefficient was experimentally determined. The resulting heat transfer coefficient was then plotted against mass flux and heat flux in order to investigate the relative importance of the two parameters. As it was found that the heat flux correlated the data much better than the mass flux, the applicability of using the LMTD (Lockhart-Martinelli) assuming a heat flux-governed flow boiling correlation was investigated. See also this Bulletin, reference 2006-2290.
Détails
- Titre original : Thermal and hydraulic characteristics of brazed plate heat exchangers. II. Current research on evaporators at KTH.
- Identifiant de la fiche : 2006-2289
- Langues : Anglais
- Source : ASHRAE Transactions. 2005 Winter Meeting. Volume 111, part 1 + CD-ROM.
- Date d'édition : 2005
Liens
Voir d'autres communications du même compte rendu (45)
Voir le compte rendu de la conférence
Indexation
-
Thèmes :
Techniques des pompes à chaleur;
Transfert de chaleur - Mots-clés : Coefficient de transfert de chaleur; Géometrie; Transfert de masse; Transfert de chaleur; Recherche; Pompe à chaleur; Performance; Paramètre; Évaporateur; Échangeur de chaleur; Échangeur à plaques; Ébullition; Chute de pression
-
Correlation between heat transfer and pressure ...
- Auteurs : ADACHI T., UEHARA H.
- Date : 11/2001
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 44 - n. 22
Voir la fiche
-
Effect of geometrical parameters on heat transf...
- Auteurs : EREK A., ÖZERDEM B., BILIR L., et al.
- Date : 10/2005
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 25 - n. 14-15
Voir la fiche
-
Investigation of heat transfer and pressure dro...
- Auteurs : DURMUS A., BENLI H., KURTBAS I., et al.
- Date : 01/2009
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 52 - n. 5-6
Voir la fiche
-
HFO1234ze(E) boiling inside a brazed plate heat...
- Auteurs : LONGO G. A., MANCIN S., RIGHETTI G., et al.
- Date : 11/07/2016
- Langues : Anglais
- Source : 2016 Purdue Conferences. 16th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Weld shape optimization for pillow plate heat e...
- Auteurs : ELDEEB R., LING J., AUTE V., et al.
- Date : 09/07/2018
- Langues : Anglais
- Source : 2018 Purdue Conferences. 17th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
Voir la fiche