Chute de pression d'un écoulement diphasique dans un canal horizontal à détente régulière.

Pressure drop of two-phase flow through horizontal channel with smooth expansion.

Numéro : pap. 2320

Auteurs : ESKIN N., DENIZ E.

Résumé

Industrial systems at where gas-liquid flow is extensively used generally have complex geometries including singularities like expansion, contraction, bends and orifices. Thus two-phase flow characteristics, such as pressure drop, through these singularities should be identified in order to be used to design these systems. In this study, pressure drop of air-water flow through horizontal channel having smooth expansion is investigated experimentally. Internal diameter of the channel expands from 40 to 50 mm. Hence area ratio of the singularity is calculated to be 0.64. Flow rate for water is constant at 3 l/s while that for air is taken as 30, 50 and 60 l/min. In the experiments, effects of volumetric void fraction and injector type on two-phase pressure drop are examined. Flow under consideration is also modeled via commercial software, GAMBIT (v. 2.3.16) and ANSYS (v. 12). Experimental results are then compared with those obtained by the numerical simulation.

Documents disponibles

Format PDF

Pages : 10 p.

Disponible

  • Prix public

    20 €

  • Prix membre*

    15 €

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Pressure drop of two-phase flow through horizontal channel with smooth expansion.
  • Identifiant de la fiche : 30006793
  • Langues : Anglais
  • Source : 2012 Purdue Conferences. 14th International Refrigeration and Air-Conditioning Conference at Purdue.
  • Date d'édition : 16/07/2012

Liens


Voir d'autres communications du même compte rendu (195)
Voir le compte rendu de la conférence