Document IIF
Conception volumétrique pour les unités de compresseur-détendeur ORC-VCC.
Volumetric design for ORC-VCC compressor-expander units.
Auteurs : MARION M., LOUAHLIA H.
Type d'article : Article de la RIF
Résumé
The combination of an ORC (Organic Rankine Cycle) with a VCC (Vapor Compression Cycle) is studied analytically. In this work, the two cycles use the same fluid and operate with a common condenser. Elementary transformations of the fluid between two consecutive points of the system are calculated using a one-dimensional thermodynamic approach considering real fluid properties, the pressure losses and irreversibilities present in the compressor, in the expander and in the pump. The performances and the recommended inlet and outlet diameters of the expander and the compressor are established for various operating conditions and 12 fluids. The system can produce a typical useful cooling capacity of 0.60 kW at 5.5 °C when using a 2 kW heating source at 65 °C and when the condenser temperature is 30 °C. The cooling capacity reaches 1.0 kW if the cold source temperature is 15.5 °C. Results show the required diameters ratios at inputs and outputs of the compressor and the expander. They indicate the situations for which the compressor is smaller than the expander and vice versa. They identify the particular cases in which the compressor and the expander have exactly the same inlet and outlet diameters. This particular case allows using two identical compressors, one working as a compressor, the second as an expander.
Documents disponibles
Format PDF
Pages : 1-10
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Volumetric design for ORC-VCC compressor-expander units.
- Identifiant de la fiche : 30029207
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 132
- Date d'édition : 12/2021
- DOI : http://dx.doi.org/10.1016/j.ijrefrig.2021.09.013
- Document disponible en consultation à la bibliothèque du siège de l'IIF uniquement.
Liens
Voir d'autres articles du même numéro (28)
Voir la source
Indexation
-
A compressor-assisted triple-effect H2O-LiBr ab...
- Auteurs : SHU G., CHE J., TIAN H., et al.
- Date : 05/02/2017
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 112
Voir la fiche
-
Thermodynamic analysis of a low-temperature org...
- Auteurs : HE Z., ZHANG Y., DONG S., et al.
- Date : 25/02/2017
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 113
Voir la fiche
-
Effect of working fluids on the performance of ...
- Auteurs : LI J., ALVI J. Z., PEI G., et al.
- Date : 05/04/2016
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 98
Voir la fiche
-
Energetic and exergetic performance investigati...
- Auteurs : KHALIQ A.
- Date : 05/02/2017
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 112
Voir la fiche
-
A novel configuration of ejector refrigeration ...
- Auteurs : SANAYE S., REFAHI A.
- Date : 07/2020
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 115
- Formats : PDF
Voir la fiche