Document IIF
Considérations sur la conception des canaux de refroidissement évaporatif au CO2 de grande longueur.
Design considerations of long length evaporative CO2 cooling lines.
Numéro : pap. n. 209
Auteurs : VERLAAT B., NOITE J.
Résumé
Evaporative CO2 cooling is under design for several new silicon particle detectors at CERN. In general the cooling lines inside the detectors are long (up to 25 m) and have small diameters (1 to 3 mm). Heat loads typical vary from 50 to 350 watt per cooling line. The individual cooling lines are manifolded and operate in parallel with each other. The long and small diameter cooling lines cause relative high pressure drops. These pressure drops cause temperature gradients which must be minimized to meet the strict temperature requirements of silicon detectors. The parallel operations of the several cooling lines which are operating with different heat loads require a careful design of the flow distribution to ensure a good heat transfer in all the channels. This paper describes the ongoing developments at CERN concerning the understanding of a proper design for long evaporative channels. A simulation program called CoBra is built to investigate the theoretical aspects. Test results on long evaporators under development for the Atlas-IBL and CMS-pixel experiments at CERN are presented and compared with the simulation model.
Documents disponibles
Format PDF
Pages : 8 p.
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Design considerations of long length evaporative CO2 cooling lines.
- Identifiant de la fiche : 30004434
- Langues : Anglais
- Source : 10th IIR-Gustav Lorentzen Conference on Natural Working Fluids (GL2012). Proceedings. Delft, The Netherlands, June 25-27, 2012.
- Date d'édition : 25/06/2012
Liens
Voir d'autres communications du même compte rendu (142)
Voir le compte rendu de la conférence
Indexation
-
Thèmes :
Evaporateurs, condenseurs et autres échangeurs thermiques;
CO2;
Cryogénie: sécurité, instrumentation et métrologie;
Autres systèmes de production de froid (dessiccation, thermoélectricité, thermoacoustique...) - Mots-clés : Canal; R744; Simulation; Système évaporatif; Évaporateur; Détecteur; CO2
-
Evaporative CO2 cooling system for the upgrade ...
- Auteurs : DAGUIN J., ARNDT K., BERTL W., et al.
- Date : 25/06/2012
- Langues : Anglais
- Source : 10th IIR-Gustav Lorentzen Conference on Natural Working Fluids (GL2012). Proceedings. Delft, The Netherlands, June 25-27, 2012.
- Formats : PDF
Voir la fiche
-
An experimental investigation on evaporative co...
- Auteurs : HARA T., WU S., MOTEGI K., et al.
- Date : 25/07/2000
- Langues : Anglais
- Source : Final proceedings of the 4th IIR-Gustav Lorentzen Conference on Natural Working Fluids at Purdue.
- Formats : PDF
Voir la fiche
-
Evaporative cooling fundamentals: the advantage...
- Auteurs : MAISOTSENKO V., GILLAN L., SMYRNOV H.
- Date : 2001
- Langues : Anglais
- Source : Non-compression refrigeration and cooling. Proceedings of the Second International Workshop.
Voir la fiche
-
An experimental study of spray cooling using FC...
- Auteurs : CHIEN L. H., WU T. L., LEE S. C.
- Date : 20/05/2009
- Langues : Anglais
- Source : ACRA-2009. The proceedings of the 4th Asian conference on refrigeration and air conditioning: May 20-22, 2009, Taipei, R.O.C.
- Formats : PDF
Voir la fiche
-
A mathematical model of heat and mass transfer ...
- Auteurs : YU J. L., FU M. X., JIN L. W., LIU S. B., CAO Q.
- Date : 21/04/1998
- Langues : Anglais
- Source : Cryogenics and refrigeration. Proceedings of ICCR '98.
Voir la fiche