Document IIF
Des matériaux à changement de phase à base de sulfate d’aluminium-ammonium pour l’utilisation efficace des rejets thermiques en excès des moteurs à gaz.
Ammonia alum hydrate-based phase change materials for effective use of excess exhaust heat from gas engines.
Numéro : pap. 0029
Auteurs : NAKAMURA K., INA T., HIDEMA R., et al.
Résumé
For effective use of excess exhaust heat from gas engines, a novel PCM was prepared by adding anhydrous sodium sulfate and D-mannitol to ammonia alum hydrate. It melted and stored latent heat at the temperature range of exhaust heat from gas engines (around 90°C). Heat storage and release characteristics of the novel PCM were investigated with a heat storage tank containing hot water and the novel PCM packaged into resin bags. As a result, the novel PCM stored and released more than 400 MJ×m-3 of heat at the temperature range between 80°C and 90°C. The amount of heat storage and release by the PCM was approximately ten times higher than that of water with same volume. This result indicates that the novel PCM can reduce the volume of hot water tank dramatically in addition to storing and releasing exhaust heat from gas engines.
Documents disponibles
Format PDF
Pages : 214-221
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Ammonia alum hydrate-based phase change materials for effective use of excess exhaust heat from gas engines.
- Identifiant de la fiche : 30023798
- Langues : Anglais
- Source : 12th IIR Conference on Phase-Change Materials and Slurries for Refrigeration and Air Conditioning. Proceedings: Orford, Canada, May 21-23, 2018.
- Date d'édition : 21/05/2018
- DOI : http://dx.doi.org/10.18462/iir.pcm.2018.0029
Liens
Voir d'autres communications du même compte rendu (52)
Voir le compte rendu de la conférence
Indexation
-
Ammonia alum hydrate-based phase change materia...
- Auteurs : NAKAMURA K., INA T., SUZUKI H., et al.
- Date : 04/2019
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 100
- Formats : PDF
Voir la fiche
-
Heat storage and release characteristics of sod...
- Auteurs : NAKAMURA K., NISHIKAWA N., HAYASHI D.
- Date : 01/09/2021
- Langues : Anglais
- Source : 13rd IIR Conference on Phase-Change Materials and Slurries for Refrigeration and Air Conditioning. Proceedings: (online) Vicenza, Italy, September 1-3, 2021.
- Formats : PDF
Voir la fiche
-
Study on TBAB hydrate nucleating activity of el...
- Auteurs : KUMANO H., GOTO H., TOYAMA Y., et al.
- Date : 09/2018
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 93
- Formats : PDF
Voir la fiche
-
TBAB hydrate slurry based latent heat thermal s...
- Auteurs : ZHOU H., INFANTE FERREIRA C.
- Date : 18/05/2016
- Langues : Anglais
- Source : 11th IIR Conference on Phase-Change Materials and Slurries for Refrigeration and Air Conditioning. Proceedings: Karlsruhe, Germany, May 18-20, 2016.
- Formats : PDF
Voir la fiche
-
Experimental analysis of aluminum foams as heat...
- Auteurs : LAZZARIN R., MANCIN S., NORO M., et al.
- Date : 23/04/2017
- Langues : Anglais
- Source : 5th IIR Conference on Thermophysical Properties and Transfer Processes of Refrigerants.
- Formats : PDF
Voir la fiche