Détermination simultanée de l’efficacité du refroidissement par film et du coefficient de transfert de chaleur sur une plaque plane.

Determination of film cooling effectiveness and heat transfer coefficient simultaneously on a flat plate.

Auteurs : ZHANG M.

Type d'article : Article de périodique

Résumé

In this paper, flat plate film cooling with two rows of compound angle cylindrical film cooling holes was investigated. A data processing method was evaluated which could determine the film cooling effectiveness and heat transfer coefficient simultaneously from the transient wall temperature data. The method was based on solving an inverse problem of the one-dimensional transient heat conduction equation. To evaluate the performance of the method, wall temperature data were obtained using the known film cooling effectiveness and heat transfer coefficient data as the convection boundary condition. Then, the method was applied to calculate the film cooling effectiveness and heat transfer coefficient based on the wall temperature data. Different blowing ratios, heat transfer coefficients, mainstream temperatures, and material thermal conductivities were investigated. In general, the data and calculation were in good agreement. It was found that the error decreased when the heat transfer coefficient increased and the material thermal conductivity decreased. The percentage error of the span-wise averaged film cooling effectiveness was mainly between 0% and 10%, and the percentage error of the span-wise averaged heat transfer coefficient was mainly between 0% and 4%.

Documents disponibles

Format PDF

Pages : 11 p.

Disponible

Gratuit

Détails

  • Titre original : Determination of film cooling effectiveness and heat transfer coefficient simultaneously on a flat plate.
  • Identifiant de la fiche : 30029884
  • Langues : Anglais
  • Sujet : Technologie
  • Source : Energies - 15 - 11
  • Éditeurs : MDPI
  • Date d'édition : 06/2022
  • DOI : http://dx.doi.org/10.3390/en15114144

Liens


Voir d'autres articles du même numéro (6)
Voir la source