Development of a carbon-ammonia adsorption gas-fired domestic heat pump.
Numéro : pap. n. 83
Auteurs : METCALF S., RIVERO PACHO A., CRITOPH R.
Résumé
An air source gas-fired heat pump system intended to replace conventional condensing boilers is under development. The adsorption cycle uses ammonia refrigerant and activated carbon adsorbent in four generators with heat recovery and has a nominal heat output of 7 kW. Predicted annual average COP based on gross calorific value is 1.35 in a UK application with low temperature radiators. The prototype was first tested in May 2011. Whilst the machine functioned as a heat pump and delivered hot water at up to 60°C, internal leakage in water diverting valves and ammonia check valves meant that the efficiency was unacceptably low. Additionally, heat transfer in the adsorption generators was poorer than predicted which resulted in a heat output of only 3 kW. Modifications were made to existing off-the-shelf ammonia check valves and bespoke water valves employing ceramic discs in a polymeric shell were developed. These were installed on the machine, together with larger generators in order to increase the heat output. The system achieved a heat output of 4.3-5 kW and a COP of 1.13-1.2.When coupled with a gas burner this equates to a COP of 1-1.06 based on gross calorific value of gas. The lower than predicted performance is attributed to ammonia check valve leakage & blockage, heat loss, and poor water flow distribution within the adsorption generators.
Documents disponibles
Format PDF
Pages : 9 p.
Disponible
Prix public
20 €
Prix membre*
15 €
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Development of a carbon-ammonia adsorption gas-fired domestic heat pump.
- Identifiant de la fiche : 30014360
- Langues : Anglais
- Source : International sorption heat pump conference (ISHPC2014), College Park, United States, March 31-April 2, 2014.
- Date d'édition : 02/03/2014
Liens
Voir d'autres communications du même compte rendu (125)
Voir le compte rendu de la conférence
Indexation
-
Sorption materials for the safe use of flammabl...
- Auteurs : SONNER C., ERNST S., SCHNABEL L.
- Date : 24/08/2019
- Langues : Anglais
- Source : Proceedings of the 25th IIR International Congress of Refrigeration: Montréal , Canada, August 24-30, 2019.
- Formats : PDF
Voir la fiche
-
Production de froid et de chaleur par pompe à c...
- Auteurs : VALKOV V., DODELET J. P., DELLERO T., et al.
- Date : 17/08/2003
- Langues : Français
- Source : 21st IIR International Congress of Refrigeration: Serving the Needs of Mankind.
- Formats : PDF
Voir la fiche
-
Experimental setup for determining ammonia-salt...
- Auteurs : PAL M. van der, BOER R. de, VELDHUIS J., et al.
- Date : 06/04/2011
- Langues : Anglais
- Source : Sources/sinks Alternative to the Outside Air for Heat Pump and Air-conditioning Techniques (Alternative Sources - AS), Padua, Italy, April 5-7, 2011. / International Sorption Heat Pump Conference (ISHPC11), Padua, Italy, April 6-8, 2011.
- Formats : PDF
Voir la fiche
-
Model-Based Performance Comparison of Ammonia C...
- Auteurs : YANG Z., QU M., GLUESENKAMP K.
- Date : 09/07/2018
- Langues : Anglais
- Source : 2018 Purdue Conferences. 17th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
Voir la fiche
-
A novel adsorption heat pump cycle: cascade mas...
- Auteurs : PAN Q., WANG R.
- Date : 07/08/2017
- Langues : Anglais
- Source : International sorption heat pump conference, ISHPC 2017, Tokyo august 7-10.
Voir la fiche