Partager

Développement de corrélations générales pour la chute de pression dans un écoulement turbulent à l'intérieur de tubes à rainures internes hélicoïdales.

Development of general correlations for pressure drop in single-phase turbulent flow inside internally helically grooved tubes.

Auteurs : INOUE N., GOTO M.

Résumé

Experiments investigating the pressure drop and heat transfer in single-phase turbulent flow inside internally helically grooved tubes were carried out using 14 helically grooved tubes and a smooth tube with outer diameters of 6.35 mm. The range of geometric parameters of the test tubes were number of grooves, 45 to 65, helix angle, 16 to 26°, and groove height, 0.2 to 0.3 mm. In the experiments, water was used as a test fluid; its inlet temperature was kept at 16 to 18°C and the flow rate varied from 0.03 to 0.11 kg/s. From the data obtained, the authors found that the friction factor increased with increasing helix angle and ratio of inner surface area of the grooved tubes to that of the smooth tube, and decreased with increasing number of grooves. Correlations for predicting the friction factor were developed based on measured data.

Détails

  • Titre original : Development of general correlations for pressure drop in single-phase turbulent flow inside internally helically grooved tubes.
  • Identifiant de la fiche : 2007-0568
  • Langues : Anglais
  • Source : ACRA-2006. Proceedings of the 3rd Asian conference on refrigeration and air conditioning.
  • Date d'édition : 21/05/2006

Liens


Voir d'autres communications du même compte rendu (161)
Voir le compte rendu de la conférence

Indexation