Partager

Ebullition en écoulement à flux thermique élevé dans des microcanaux multiples en silicone. I. Caractéristiques du transfert de chaleur du frigorigène R236fa.

High heat flux flow boiling in silicon multi-microchannels. I. Heat transfer characteristics of refrigerant R236fa.

Auteurs : AGOSTINI B., THOME J. R., FABBRI M., et al.

Type d'article : Article

Résumé

This article is the first in a three part study on flow boiling of refrigerants R236fa and R245fa in a silicon multi-microchannel heat sink. The heat sink was composed of 67 parallel channels, which are 223 µm wide, 680 µm high and 20 mm long with 80 µm thick fins separating the channels. The base heat flux was varied from 3.6 to 221 W/cm2, the mass velocity from 281 to 1501 kg/m2.s and the exit vapour quality from 2 to 75%. The working pressure and saturation temperature were set nominally at 273 kPa and 25°C, respectively. The present database includes 1217 local heat transfer coefficient measurements, for which three different heat transfer trends were identified, but in most cases the heat transfer coefficient increased with heat flux and was almost independent of vapour quality and mass velocity. Importantly, it was found for apparently the first time that the heat transfer coefficient as a function of vapour quality reaches a maximum at very high heat fluxes and then decreases with further increase of heat flux. [Reprinted with permission from Elsevier. Copyright, 2008]. See also this Bulletin, references 2009-0059 and 0061.

Détails

  • Titre original : High heat flux flow boiling in silicon multi-microchannels. I. Heat transfer characteristics of refrigerant R236fa.
  • Identifiant de la fiche : 2009-0060
  • Langues : Anglais
  • Source : International Journal of Heat and Mass Transfer - vol. 51 - n. 21-22
  • Date d'édition : 10/2008

Liens


Voir d'autres articles du même numéro (4)
Voir la source

Indexation