Ébullition en écoulement continu ou pulsatoire. Partie 1 : Comparaison expérimentale et visualisation.
Continuous vs. pulsating flow boiling. Part 1: Experimental comparison and visualization.
Numéro : pap. 2513
Auteurs : KAERN M. R., ELMEGAARD B., MEYER K. E., et al.
Résumé
This experimental study investigates an active method for flow boiling heat transfer enhancement by means of fluid flow pulsation. The hypothesis is that pulsations increase the flow boiling heat transfer by means of better bulk fluid mixing, increased wall wetting and flow-regime destabilization. The fluid pulsations are introduced by a flow modulating expansion device and are compared with continuous flow by a stepper-motor expansion valve in terms of time-averaged heat transfer coefficient. The cycle time ranges from 1 s to 9 s for the pulsations. The time-averaged heat transfer coefficients are reduced from transient measurements immediately downstream of the expansion valves at low vapor qualities. The results show that the pulsations improve the time-averaged heat transfer coefficient by 3.2 % on average at low cycle time (1 s to 2) s, whereas the pulsations may reduce the time-averaged heat transfer coefficient by as much as 8 % at high heat flux (q = 35 kW/m2) and cycle time (8 s). The latter reduction is adhered to the significant dry-out when the flow modulating expansion valve is closed.
Documents disponibles
Format PDF
Pages : 9
Disponible
Prix public
20 €
Prix membre*
15 €
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Continuous vs. pulsating flow boiling. Part 1: Experimental comparison and visualization.
- Identifiant de la fiche : 30018844
- Langues : Anglais
- Source : 2016 Purdue Conferences. 16th International Refrigeration and Air-Conditioning Conference at Purdue.
- Date d'édition : 11/07/2016
Liens
Voir d'autres communications du même compte rendu (274)
Voir le compte rendu de la conférence
Indexation
- Thèmes : Transfert de chaleur
- Mots-clés : Pulsation; Comparaison; Transfert de chaleur; Optimisation; Experimentation; Ébullition en écoulement
-
Continuous vs. pulsating flow boiling. Part 2: ...
- Auteurs : KAERN M. R., ELMEGAARD B., MEYER K. E., et al.
- Date : 11/07/2016
- Langues : Anglais
- Source : 2016 Purdue Conferences. 16th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Surface effects in flow boiling of R134a in mic...
- Auteurs : MAHMOUD M. M., KARAYIANNIS T. G., KENNING D. B. R.
- Date : 07/2011
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 54 - n. 15-16
Voir la fiche
-
Comparison on evaporation heat transfer between...
- Auteurs : NAKAMURA S., KONDOU C., TAKATA N., et al.
- Date : 11/07/2016
- Langues : Anglais
- Source : 2016 Purdue Conferences. 16th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
Voir la fiche
-
A comparison between recent experimental result...
- Auteurs : BIGI A. A. M., CREMASCHI L.
- Date : 11/07/2016
- Langues : Anglais
- Source : 2016 Purdue Conferences. 16th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Subcooled flow boiling heat transfer from micro...
- Auteurs : SUN Y., ZHANG L., XU H., et al.
- Date : 06/2011
- Langues : Anglais
- Source : International Journal of thermal Sciences - vol. 50 - n. 6
Voir la fiche