Effet de l'huile sur le transfert de chaleur lors de l'ébullition en écoulement et des configurations de l'écoulement du CO2 à l'intérieur des tubes horizontaux de 11,2 mm lisses et à surface augmentée.
Effect of oil on flow boiling heat transfer and flow patterns of CO2 in 11.2 mm horizontal smooth and enhanced tube.
Résumé
Flow boiling heat transfer characteristics of CO2 with and without oil were investigated experimentally in horizontal smooth and enhanced tubes with an inner diameter of 11.2 mm. The visualization of flow pattern was also performed to provide the detailed attributes of the nucleate and the convective boiling heat transfer. In order to investigate the effect of the miscible oil on the heat transfer of CO2, POE (polyolester) RENSIO C85E oil is added to give an oil circulation rate (OCR) between 0.5 % and 2 %. Results are compared with those of pure CO2. The experimental conditions include evaporation temperatures of -15°C, mass fluxes from 40 to 200 kg/m2.s, heat fluxes from 0.5 to 10 kW/m2, and vapor qualities from 0.1 to 0.8. Oil generally deteriorates the heat transfer coefficient of pure CO2. The reduction in heat transfer coefficient is most apparent at low vapor qualities, 0.1 to 0.4, and at low mass fluxes, 100 and 200 kg/m2. It is caused by the suppression of nucleate boiling due to increased surface tension. At conditions where the convective boiling contribution is dominant, vapor qualities above 0.5, oil increases heat transfer coefficients. Through visualization, it is shown that the wetted area on the perimeter of inner tube is enhanced due to formation of foaming in the smooth tube. However, such enhancement of heat transfer due to forming is negligible in the enhanced tube, because the enhanced factor due to micro-finned structures is dominant.
Documents disponibles
Format PDF
Pages : 9 p.
Disponible
Prix public
20 €
Prix membre*
15 €
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Effect of oil on flow boiling heat transfer and flow patterns of CO2 in 11.2 mm horizontal smooth and enhanced tube.
- Identifiant de la fiche : 30006335
- Langues : Anglais
- Source : 2012 Purdue Conferences. 14th International Refrigeration and Air-Conditioning Conference at Purdue.
- Date d'édition : 16/07/2012
Liens
Voir d'autres communications du même compte rendu (195)
Voir le compte rendu de la conférence
Indexation
-
Flow boiling heat transfer characteristics of C...
- Auteurs : GAO L., WATANABE Y., SATO M., et al.
- Date : 07/06/2010
- Langues : Anglais
- Source : ACRA2010. Asian conference on refrigeration and air conditioning: Tokyo, Japan, June 7-9, 2010.
- Formats : PDF
Voir la fiche
-
Oil effects on in-tube evaporation of CO2.
- Auteurs : HRNJAK P.
- Date : 04/12/2013
- Langues : Anglais
- Source : 44th International HVAC&R Congress and Exhibition.
- Formats : PDF
Voir la fiche
-
Model for prediction of flow boiling heat trans...
- Auteurs : LI M., DANG C., TANAKA S., et al.
- Date : 07/06/2010
- Langues : Anglais
- Source : ACRA2010. Asian conference on refrigeration and air conditioning: Tokyo, Japan, June 7-9, 2010.
- Formats : PDF
Voir la fiche
-
Measurement of flow boiling heat transfer coeff...
- Auteurs : GAO L., HAMADA W., HONDA T.
- Date : 21/08/2011
- Langues : Anglais
- Source : Proceedings of the 23rd IIR International Congress of Refrigeration: Prague, Czech Republic, August 21-26, 2011. Overarching theme: Refrigeration for Sustainable Development.
- Formats : PDF
Voir la fiche
-
R744 flow boiling heat transfer with and withou...
- Auteurs : KIM S., PEHLIVANOGLU N., HRNJAK P.
- Date : 12/07/2010
- Langues : Anglais
- Source : 2010 Purdue Conferences. 13th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
Voir la fiche