Document IIF
Effet du traitement de la surface par enrobage thermique par pulvérisation sur la performance du transfert de chaleur lors de l'ébullition.
Effect of surface treatment by thermal spray coating on boiling heat transfer performance.
Numéro : pap. ID: 644
Auteurs : ASANO H., TOMITA R., KAWASAKI K., et al.
Résumé
This study deals with a boiling heat transfer enhancement by a thermal spray coating. The coating was fabricated by vacuum plasma spraying using fine copper particle. The boiling heat transfer performance in a narrow channel was experimentally examined. The effects of the flow condition, the heating condition, and the channel inclined angle, on the heat transfer coefficient and the critical heat flux were considered. The experiments were conducted for saturated flow boiling of HCFC-123 and subcooled flow boiling of FC-72. The experimental results show that the coating could improve the boiling heat transfer coefficient. There was a little effect of the channel height on the boiling heat transfer for each surface. The effect of the channel inclined angle was observed only for the coating in the low quality and the low mass flux condition. The horizontal flow with the top heating produced the highest heat transfer coefficient for the coating. There is no marked effect of the channel inclined angle in the high quality and the high mass flux region. For the subcooled flow boiling, the critical heat flux, CHF, increased about 20% by the coating in the condition with large subcooling degree of 40 K. The reason might be that vapour bubbles over the coating were immediately condensed due to the smaller diameter.
Documents disponibles
Format PDF
Pages : 9 p.
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Effect of surface treatment by thermal spray coating on boiling heat transfer performance.
- Identifiant de la fiche : 30002100
- Langues : Anglais
- Source : Proceedings of the 23rd IIR International Congress of Refrigeration: Prague, Czech Republic, August 21-26, 2011. Overarching theme: Refrigeration for Sustainable Development.
- Date d'édition : 21/08/2011
Liens
Voir d'autres communications du même compte rendu (569)
Voir le compte rendu de la conférence
-
Flow boiling heat transfer of refrigerant FC-72...
- Auteurs : SARACENO L., CELATA G. P., FURRER M., et al.
- Date : 03/2012
- Langues : Anglais
- Source : International Journal of thermal Sciences - vol. 53
Voir la fiche
-
Experimental study of flow boiling of FC-72 in ...
- Auteurs : HU X., LIN G., CAI Y., et al.
- Date : 12/2011
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 31 - n. 17-18
Voir la fiche
-
Heat transfer enhancement in evaporation by the...
- Auteurs : ASANO H., TOMITA R., SHIGEHARA R., et al.
- Date : 17/02/2010
- Langues : Anglais
- Source : Measures to address climate change. 2010 International Symposium on Next-generation Air Conditioning and Refrigeration Technology: February 17-19, Tokyo, Japan.
Voir la fiche
-
Boiling heat transfer enhancement by thermal sp...
- Auteurs : ASANO H., TOMITA R., INOUE M., et al.
- Date : 07/06/2010
- Langues : Anglais
- Source : ACRA2010. Asian conference on refrigeration and air conditioning: Tokyo, Japan, June 7-9, 2010.
- Formats : PDF
Voir la fiche
-
Impact of selected parameters on refrigerant fl...
- Auteurs : PIASECKA M.
- Date : 08/2015
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 56
- Formats : PDF
Voir la fiche