Document IIF
Étude de la performance d'éjecteurs à tuyères ajustables.
Investigation on performance of ejectors with adjustable nozzles.
Numéro : pap. n. 157
Auteurs : CHEN Z., DANG C., SHIMIZU A., et al.
Résumé
In this study, the performance characteristics of adjustable nozzles were experimentally investigated. In these nozzles, a spindle is used to control the cross-sectional area of the ejector nozzle throat, and magnetic force is used to control the position of the spindle. The change in the throat area and the controller input for the spindle were found to have a nearly linear relationship. In the experiment, the generating pressure was set to 1.9 MPa, and the back pressure was set to 0.83 MPa. A de Laval nozzle and a converging nozzle with the same throat dimensions were used in the experiment. In the results, both ejectors showed peak performances as the throat area was changed. The de Laval nozzle performed better at its peak condition, but its performance quickly dropped under off-design conditions. In contrast, the converging nozzle showed only slight changes to the performance as it was adjusted with a lower peak performance. The converging nozzle is recommended for realizing a more stable change in performance by an adjustable ejector.
Documents disponibles
Format PDF
Pages : 8 p.
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Investigation on performance of ejectors with adjustable nozzles.
- Identifiant de la fiche : 30015320
- Langues : Anglais
- Source : Proceedings of the 24th IIR International Congress of Refrigeration: Yokohama, Japan, August 16-22, 2015.
- Date d'édition : 16/08/2015
- DOI : http://dx.doi.org/10.18462/iir.icr.2015.0157
Liens
Voir d'autres communications du même compte rendu (657)
Voir le compte rendu de la conférence
Indexation
- Thèmes : Systèmes à éjection, cycle à air, cycle Stirling, autres cycles
- Mots-clés : Tuyère; Performance; Experimentation; Éjecteur
-
1D analysis of CO2 sub-cooled/supercritical eje...
- Auteurs : KSAYER E. B. L., CLODIC D.
- Date : 07/09/2008
- Langues : Anglais
- Source : 8th IIR-Gustav Lorentzen Conference on Natural Working Fluids (GL2008)
- Formats : PDF
Voir la fiche
-
An experimental analysis of the impact of prima...
- Auteurs : THONGTIP T., APHORNRATANA S.
- Date : 05/01/2017
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 110
Voir la fiche
-
Effect of throat diameters of the ejector on th...
- Auteurs : CHAIWONGSA P., WONGWISES S.
- Date : 06/2007
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 30 - n. 4
- Formats : PDF
Voir la fiche
-
Study of a novel inlet geometry for ejectors.
- Auteurs : BAUZVAND A., TAVOUSSI E., NOGHREHABADI A., BEHBAHANI-NEJAD M.
- Date : 07/2022
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 139
- Formats : PDF
Voir la fiche
-
Comparison of various motive flow control metho...
- Auteurs : ELBEL S., LAWRENCE N., ZHU J.
- Date : 20/07/2017
- Langues : Anglais
- Source : 8th international conference on compressors and refrigeration, 2017.
- Formats : PDF
Voir la fiche