Document IIF
Étude du processus de séchage des surfaces mouillées dans des conditions similaires à celles utilisées pour la transformation d'aliments.
Study of the drying process of wetted surfaces under conditions similar to food processing conditions.
Auteurs : LECOQ L., FLICK D., LAGUERRE O.
Type d'article : Article, Article de la RIF
Résumé
Two experiments were carried out inside a test room in order to study the drying rate of wetted surfaces under conditions similar to those encountered in food processing plants. In the first experiment, the evaporation of water droplets on a stainless steel plate representing typical equipment was studied under different ambient conditions in the room. In the second experiment, in order to reproduce drying conditions inside a food processing plant, the floor was entirely wetted with water, the water mass evolution was measured when the discharge air was dried by a dehumidifier, and the results were compared with those obtained without using a dehumidifier. Models predicting the evaporation rate in these two experiments were developed and the numerical results show good agreement with the experimental data. Relative humidity was the factor which exerted the greatest influence on the evaporation rate. The drying rate on the stainless steel plate increased five-fold when a dehumidifier was used.
Documents disponibles
Format PDF
Pages : 69-81
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Study of the drying process of wetted surfaces under conditions similar to food processing conditions.
- Identifiant de la fiche : 30022175
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 81
- Date d'édition : 09/2017
- DOI : http://dx.doi.org/10.1016/j.ijrefrig.2017.05.024
Liens
Voir d'autres articles du même numéro (13)
Voir la source
Indexation
-
Experimental investigation of spray cooling on ...
- Auteurs : LI J., JIANG P. X., ZHANG Z.
- Date : 03/2013
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 51 - n. 1-2
Voir la fiche
-
Transient cooling of electronic components by f...
- Auteurs : HARMAND S., SONAN R., FAKÈS M., et al.
- Date : 08/2011
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 31 - n. 11-12
Voir la fiche
-
Cooling performance of bio-mimic perspiration b...
- Auteurs : CUI S., HU Y., HUANG Z., et al.
- Date : 05/2014
- Langues : Anglais
- Source : International Journal of thermal Sciences - vol. 79
Voir la fiche
-
Thermal resistance-capacitance network model fo...
- Auteurs : LIU H. R., HUA B. J., WANG C. X., WANG R. Z.
- Date : 11/2021
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 131
- Formats : PDF
Voir la fiche
-
Water temperature influence on metallic materia...
- Auteurs : GRECU A., GALUSCA D. G., NEJNERU C., et al.
- Date : 2010
- Langues : Anglais
- Source : Buletinul Institutului politehnic din Iasi, Sectia Stiinta si Ingineria Materialelor - vol. 56 - n. 3
Voir la fiche