Partager

Etude expérimentale de la phase post-séchage avec du R-134a en écoulement ascendant à l'intérieur d'un tube lisse ou de tubes nervurés.

Experimental study of post-dryout with R-134a upward flow in smooth tube and rifled tubes.

Auteurs : LEE S. K., CHANG S. H.

Type d'article : Article

Résumé

A study of post-dryout heat transfer was performed with a directed heated smooth tube and rifled tubes using vertical R-134a up-flow to investigate the heat transfer characteristics in the post-dryout region. Three types of rifled tube having different rib height and width were used to examine the effects of rib geometry and compare with the smooth tube, using a mass flux of 70-800 kg/m2.s and a pressure of 13-24 bars (corresponding to an approximate water pressure of 80-140 bars). Wall temperature distribution in all tubes was strongly dependent on pressure and mass flux. Wall temperatures of the rifled tubes in the post-dryout region were much lower than for the smooth tube at same conditions. This was attributed to swirl flow caused by the rib. Thus, the thermal non-equilibrium, which is usually present in the post-dryout region, was lowered. The empirical correlation of heat transfer in the smooth tube of the post-dryout region was obtained. The heat transfer correlation for rifled tubes was also obtained as a function of rib height and width with the modification of the smooth tube correlation. [Reprinted with permission from Elsevier. Copyright, 2007].

Détails

  • Titre original : Experimental study of post-dryout with R-134a upward flow in smooth tube and rifled tubes.
  • Identifiant de la fiche : 2008-2049
  • Langues : Anglais
  • Source : International Journal of Heat and Mass Transfer - vol. 51 - n. 11-12
  • Date d'édition : 06/2008

Liens


Voir d'autres articles du même numéro (6)
Voir la source

Indexation