Partager

Étude expérimentale du refroidissement par pulvérisation d’eau pour la réduction de la température d’un compresseur à piston liquide.

Experimental investigation of water spray cooling for temperature reduction in liquid piston compressor.

Numéro : pap. 1687

Auteurs : ACHARYA P., PATIL V., RO P.

Résumé

For many compressor applications achieving an efficient compressor necessitates an isothermal compression process. A high heat transfer rate during the compression process is needed for reaching near-isothermal conditions. In this study, experimental investigations are carried out with water spray injection in a liquid piston compressor during the compression process to absorb the heat and lower the temperature. A low flow full-cone nozzle with 0.045 in (0.1143 cm) diameter is used for the experiments with different injection pressures. Injection of water spray proved to be an effective heat transfer mechanism for a substantial temperature drop of air during the compression process. It is observed that increasing the injection pressure of spray resulted in a temperature reduction of 10-20 K during compression. For a compression ratio of 2.5, a 10-20% efficiency improvement was observed during the compression.

Documents disponibles

Format PDF

Pages : 8

Disponible

  • Prix public

    20 €

  • Prix membre*

    15 €

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Experimental investigation of water spray cooling for temperature reduction in liquid piston compressor.
  • Identifiant de la fiche : 30024391
  • Langues : Anglais
  • Source : 2018 Purdue Conferences. 24th International Compressor Engineering Conference at Purdue.
  • Date d'édition : 09/07/2018

Liens


Voir d'autres communications du même compte rendu (130)
Voir le compte rendu de la conférence

Indexation