Partager

Inserts en forme de turbine imprimés en 3D en tant qu'amortisseurs de pulsations de pression efficaces dans les collecteurs des compresseurs volumétriques. 

3D printed turbine-like inserts as an effective pressure pulsation dampers in positive-displacement compressors manifolds.

Numéro : 1219

Auteurs : MLYNARCZYK P., BREWCZYNSKI D., KRAJEWSKA-SPIEWAK J., LEMPA P., BLADEK J., CHMIELARCZYK K.

Résumé

Pressure pulsations in positive-displacement compressors manifolds are well known phenomenon to industry and science. However, in the field of developing methods for damping pressure pulsations, there is still no universal solution that would be simple, cheap and did not significantly affect the compressed gas system. One of the proposed solution, which has been developed for several years, is the installation of shaped inserts in the compressor discharge pipeline for pressure pulsation damping. It has already been shown that such inserts suppress pressure pulsations at wide range of frequencies. It is very important especially in refrigeration installations with continuous compressor operation. The significant disadvantage of the narrowing of the pipeline is pressure drop, which increases the demand for compression unit power. Thanks to the 3D printing techniques, it is possible to design very complex shapes that will allow for the damping of pressure pulsations to a sufficient extent and at the same time will not have a significant impact on the compression power. The conducted experimental studies for two different turbine-like shapes show that it is possible to influence pressure pulsations and at the same time not to generate significant losses in the flow. As part of the work, the influence of two different shapes was compared. Fixed nozzles and nozzles with 1 degree of freedom of movement (rotation) were compared. The tests were carried out on two test stands. A reciprocating compressor was used for lower frequencies investigations and a screw compressor stand was used for higher pressure pulsation frequencies.

Documents disponibles

Format PDF

Pages : 9 p.

Disponible

Gratuit

Télécharger

Détails

  • Titre original : 3D printed turbine-like inserts as an effective pressure pulsation dampers in positive-displacement compressors manifolds.
  • Identifiant de la fiche : 30030288
  • Langues : Anglais
  • Sujet : Technologie
  • Source : 2022 Purdue Conferences. 26th International Compressor Engineering Conference at Purdue.
  • Date d'édition : 15/07/2022

Liens


Voir d'autres communications du même compte rendu (83)
Voir le compte rendu de la conférence

Indexation