Partager

Etude expérimentale et modélisation du transfert de chaleur pendant l'ébullition convective dans un minicanal.

Experimental investigation and modelling of heat transfer during convective boiling in a minichannel.

Auteurs : BOYE H., STAATE Y., SCHMIDT J.

Type d'article : Article

Résumé

Flow boiling heat transfer characteristics of water are experimentally studied in a circular minichannel with an inner diameter of 1500 micro-m. The fluid flows upwards and the test section, made of the nickel alloy Inconel 600, is directly electrically heated. Thus, the evaporation takes place under the defined boundary condition of constant heat flux. Mass fluxes between 50 and 100 kg/(m2.s) and heat fluxes from 10 to 115 kW/m2 at an inlet pressure of 3 bars are examined. Infrared thermography is applied to measure the outer wall temperatures of the minichannel. This experimental method permits the identification of different boiling regions, boiling mechanisms and the determination of local heat transfer coefficients. Measurements are carried out in single-phase flow, subcooled and saturated boiling regions. The experimental heat transfer coefficients in the region of saturated boiling are compared with correlations available in literature and with a physically founded model developed for convective boiling.[Reprinted with permission from Elsevier. Copyright, 2006].

Détails

  • Titre original : Experimental investigation and modelling of heat transfer during convective boiling in a minichannel.
  • Identifiant de la fiche : 2007-1011
  • Langues : Anglais
  • Source : International Journal of Heat and Mass Transfer - vol. 50 - n. 1-2
  • Date d'édition : 01/2007

Liens


Voir d'autres articles du même numéro (4)
Voir la source

Indexation