Document IIF
Étude expérimentale et optimisation du modèle de performance thermodynamique d'un compresseur de vapeur d'eau monovis.
Experimental study and model optimization of thermodynamic performance of a single screw water vapor compressor.
Résumé
Single screw water vapor compressor has greater advantages under conditions of low suction temperature and high compression ratio, however, the current study has the following limitations: (1) the volumetric and isentropic efficiency were substituted as a fixed value into the models of compressor, (2) The suction temperature is concentrated in the medium-high region, (3) The compression ratio is concentrated in the medium-low range, which failed to accurately describe the water vapor compression process. Therefore, the relationship between the volumetric efficiency, isentropic efficiency and key characteristic parameters of compressor is studied experimentally, the mathematical models of the volume flow and compression power are established and verified by experiments, the changes of the mass flow, compression power, COP and SMER with suction temperature, discharge pressure and compression ratio are analyzed, the operation process parameters of the single-screw water vapor compressor are optimized.
Documents disponibles
Format PDF
Pages : 135-144
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Experimental study and model optimization of thermodynamic performance of a single screw water vapor compressor.
- Identifiant de la fiche : 30032316
- Langues : Anglais
- Sujet : Technologie
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 161
- Date d'édition : 05/2024
- DOI : http://dx.doi.org/10.1016/j.ijrefrig.2024.02.024
Liens
Voir d'autres articles du même numéro (20)
Voir la source
-
Experiment study of a water injected twin screw...
- Auteurs : SHEN J., TANG H., ZHANG Z., et al.
- Date : 14/07/2014
- Langues : Anglais
- Source : 2014 Purdue Conferences. 22nd International Compressor Engineering Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Optimization of the tip profile of orbiting scr...
- Auteurs : SUN S. H., SONG Z., GUO P. C., ZHANG B., MAO Z. K.
- Date : 09/2021
- Langues : Anglais
- Source : 12th International Conference on Compressors and their Systems
- Formats : PDF
Voir la fiche
-
Development of a water-injected twin-screw comp...
- Auteurs : SHEN J., XING Z., ZHANG K., et al.
- Date : 25/02/2016
- Langues : Anglais
- Source : Applied Thermal Engineering - vol. 95
Voir la fiche
-
Study on the performance of the boil-off gas tw...
- Auteurs : ZHOU Y., GUO Y., WANG Y., DIAO A., PENG X.
- Date : 07/2024
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 163
- Formats : PDF
Voir la fiche
-
USE OF THE METHOD OF MAGNETIC SCORE TO MEASURE ...
- Auteurs : ZENAN X.
- Date : 04/08/1986
- Langues : Anglais
Voir la fiche