Partager

Étude expérimentale menée sur l'ébullition en écoulement du FC-72 à l'intérieur de mini-canaux parallèles à une pression inférieure à la pression atmosphérique.

Experimental study of flow boiling of FC-72 in parallel minichannels under sub-atmospheric pressure.

Auteurs : HU X., LIN G., CAI Y., et al.

Type d'article : Article

Résumé

Using FC-72 as the coolant, a closed-loop two-phase minichannel heat sink driven by a micro-gear pump was developed in this work. The cooling system was made of oxygen-free copper containing 14 parallel channels of the dimension of 0.8 mm (W) x 2 mm(D) x 20 mm(L). The cooling performance of the heat sink was evaluated by the heat transfer coefficient and pressure drop under different conditions. Experiments were performed under the conditions of initial pressure of P(in) = 73 and 101 kPa, mass velocity of G = 71-250 kg/m2 s, outlet quality of x(e,out ) = 0-0.9 and heat flux of q’’ = 25-140 W/cm2. The experiments show that a maximum heat dissipation rate of 96 W/cm2 can be achieved while keeping the heating surface temperature below 85°C within the experimental range. A strong dependence of the average heat transfer coefficients (HTC) on both mass flux and heat flux was observed, and the data of atmospheric pressure followed the same trend qualitatively with that of sub-atmospheric pressure. Further discussion of the boiling mechanism shows some distinctive features of FC-72 in multiple minichannels.

Détails

  • Titre original : Experimental study of flow boiling of FC-72 in parallel minichannels under sub-atmospheric pressure.
  • Identifiant de la fiche : 30006279
  • Langues : Anglais
  • Source : Applied Thermal Engineering - vol. 31 - n. 17-18
  • Date d'édition : 12/2011
  • DOI : http://dx.doi.org/10.1016/j.applthermaleng.2011.07.032

Liens


Voir d'autres articles du même numéro (21)
Voir la source

Indexation