Document IIF
Étude expérimentale sur les performances de refroidissement par adsorption d’un système à double lit de MIL-101/isobutane durci par mousses de cuivre.
Experimental study on adsorption cooling performance of copper foams curing MIL-101/isobutane double bed system.
Résumé
In this paper, copper foams cured MIL-101(CFCM)/isobutane double-bed adsorption cooling system (ACS) were designed and constructed by using the CFCM unit tube adsorbers. Adsorption cooling characteristic curves of CFCM/isobutane double-bed ACS were studied. Influence of cycle parameters and mass recovery process on the cooling capacity, specific cooling power (SCP) and coefficient of performance (COP) of the CFCM/isobutane double-bed ACS was investigated. Results show that under the conditions of cycle time of 600 s, pre-cooling/pre-heating time of 120 s, condensation temperature of 15°C and hot water temperature of 85°C with the flow rate of 20 L h−1, and cooling water temperature of 14-16°C with the flow rate of 50 L h−1, the cooling capacity, SCP and COP of CFCM/isobutane double-bed ACS is 65.20 kJ kg−1, 108.67 W kg−1 and 0.2260, respectively. Compared with basic cycle, the cooling capacity, SCP and COP of CFCM/isobutane double-bed ACS increases by about 26%, 24% and 22% under mass recovery time of 10 s. The cooling performance of CFCM/isobutane double-bed ACS remains stable after 100 sets consecutive basic cycles and 20 sets mass recovery cycles.
Documents disponibles
Format PDF
Pages : 437-447
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Experimental study on adsorption cooling performance of copper foams curing MIL-101/isobutane double bed system.
- Identifiant de la fiche : 30029150
- Langues : Anglais
- Sujet : Technologie
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 131
- Date d'édition : 11/2021
- DOI : http://dx.doi.org/10.1016/j.ijrefrig.2021.04.018
- Document disponible en consultation à la bibliothèque du siège de l'IIF uniquement.
Liens
Voir d'autres articles du même numéro (95)
Voir la source
Indexation
-
Experimental study of the optimal mixing ratio ...
- Auteurs : HELMY M., EL-GHETANY H. H., AHMED M. H., MOSALAM H., ALY W. I. A.
- Date : 11/2024
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 167
- Formats : PDF
Voir la fiche
-
Novel compact bed design for adsorption cooling...
- Auteurs : MOHAMMED R. H., MESALHY O., ELSAYED M. L., et al.
- Date : 08/2017
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 80
- Formats : PDF
Voir la fiche
-
Gradient porosity distribution of adsorbent bed...
- Auteurs : LI M., ZHAO Y., LONG R., LIU Z., LIU W.
- Date : 08/2021
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 128
- Formats : PDF
Voir la fiche
-
Active control of supercooling degree using two...
- Auteurs : MATSUMOTO K., UEDA J., EHARA K., et al.
- Date : 01/2018
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 85
- Formats : PDF
Voir la fiche
-
Performance study of adsorption refrigeration s...
- Auteurs : XU Q., WU J., XU Z.
- Date : 11/2021
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 131
- Formats : PDF
Voir la fiche