Document IIF
Étude numérique du phénomène de condensation sur toute la longueur de la conduite d’un condenseur à tube à ailettes.
Numerical investigation of condensation phenomenon along the pipe length of a finned tube condenser.
Auteurs : TORE H., KILICARSHAN A.
Type d'article : Article de la RIF
Résumé
The investigation of condensation phenomenon in industrial vapor compression refrigeration systems is significant due to the determination of optimum condenser area and condensation heat transfer efficiency. Previous studies in the literature have generally experimentally and/or numerically observed the condensation phenomenon in straight pipes or parallel pipe bundles. However, this study investigates the condensation phenomenon in an Industrial air-cooled finned tube condenser numerically. There is also a lack of literature investigating the condensation phenomenon along the pipe length of industrial air-cooled finned tube condensers as a function of air speeds, temperatures, and relative humidity conditions for different refrigerants, such as R134a, R1234yf, and R507a. The k-epsilon (k-ℇ) turbulence model and SIEMENS–FloEFD-v22.05 simulation software were used to model the condensation flow (two-phase flow) in the Computational Fluid Dynamics (CFD) analysis. As the temperature and relative humidity of the air passing through the condenser decreased or as the air speed increased, the length of the condenser pipe at which the refrigerants under study (R134a, R1234yf, and R507a) started to condense decreased. The smallest length of the condenser pipe at which condensation started (417 mm), in other words, the minimum area for condensation, was obtained using R507a as a refrigerant at a speed of 3.7 m/s, a temperature of 18.5 ◦C, and a relative humidity of 43 %.
Documents disponibles
Format PDF
Pages : 14 p.
Disponible
Prix public
20 €
Prix membre*
Gratuit
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Numerical investigation of condensation phenomenon along the pipe length of a finned tube condenser.
- Identifiant de la fiche : 30034366
- Langues : Anglais
- Sujet : Technologie
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 179
- Date d'édition : 11/2025
- DOI : http://dx.doi.org/https://doi.org/10.1016/j.ijrefrig.2025.08.006
Liens
Voir d'autres articles du même numéro (29)
Voir la source
Indexation
- Thèmes : Evaporateurs, condenseurs et autres échangeurs thermiques
- Mots-clés : Condensation; Tube ailette; Condenseur; Industrie; Échangeur de chaleur
-
INTENSIFICATION DE L'ECHANGE DE CHALEUR DANS LE...
- Auteurs : RIFERT V. G.
- Date : 1981
- Langues : Russe
- Source : Kholodilnaya Tekhnika - n. 4
Voir la fiche
-
Evaporator and condenser selection.
- Auteurs : MACKENZIE S. J.
- Date : 11/2010
- Langues : Anglais
- Source : IRHACE J. - vol. 22 - n. 6
Voir la fiche
-
EFFECT OF FIN SPACING ON THE PERFORMANCE OF HOR...
- Auteurs : YAU K. K., COOPER J. R., ROSE J. W.
- Date : 05/1985
- Langues : Anglais
- Source : J. Heat Transf. - vol. 107 - n. 2
Voir la fiche
-
ECHANGEURS FRIGORIFIQUES : UN EXEMPLE DE RECHER...
- Auteurs : NAVARRO J., BASTARD J.
- Date : 10/09/1991
- Langues : Français
- Source : J. CCI - vol. 2 - n. 9
Voir la fiche
-
Heat transfer analysis of fin-and-tube heat exc...
- Auteurs : CARIJA Z., FRANKOVIC B., PERCIC M., et al.
- Date : 09/2014
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 45
- Formats : PDF
Voir la fiche