Partager

Étude numérique sur les caractéristiques de transfert de chaleur et du coefficient de frottement lors de l'écoulement croisé en continu dans le faisceau d’un tube non-circulaire.

Numerical investigation of heat transfer and friction factor characteristics from in-line cam shaped tube bank in crossflow.

Auteurs : MANGRULKAR C. K., DHOBLE A. S., DESHMUKH A. R., et al.

Type d'article : Article

Résumé

Tube bank heat exchangers are considered to be an effective device for heat transfer between two fluids. Researchers investigated various arrangements and along with different geometries of the tube, so as to improve the thermal performance of the tube bank. In the present study, the numerical investigation is carried out to determine the thermal performance of cam shaped tube. The study is performed for the heat transfer and friction factor characteristics in the Reynolds number range from 11,500 to 42,500. The result of the numerical simulation indicates the superior thermal performance of the cam shaped tube banks over the circular tubes. As the friction factor is reduced by 85–89% as compared to the circular tubes the heat transfer by friction factor (Nu/f) is increased by 5 times as compared to circular tubes. However, the efficiency of cam tubes with a pitch ratio of 1.5 is higher than that of the pitch ratio of 2.0. Further, the area goodness factor is also around 9 times higher than circular tubes.

Détails

  • Titre original : Numerical investigation of heat transfer and friction factor characteristics from in-line cam shaped tube bank in crossflow.
  • Identifiant de la fiche : 30020523
  • Langues : Anglais
  • Source : Applied Thermal Engineering - vol. 110
  • Date d'édition : 05/01/2017
  • DOI : http://dx.doi.org/10.1016/j.applthermaleng.2016.08.174

Liens


Voir d'autres articles du même numéro (49)
Voir la source

Indexation