Impact de la modélisation de la déshumidification sur la prévision de la performance pour des évaporateurs à minicanaux.
Impact of dehumidification modelling on the performance prediction for minichannel evaporators.
Numéro : pap. 2198
Auteurs : HUSSEIN HASSAN A., MARTÍNEZ-BALLESTER S., GONZÁLVEZ-MACIÁ J.
Résumé
In this paper a two-dimensional numerical model for a minichannel evaporator is implemented. This model takes into account the variation of wall (fin and tube) temperature and moist air properties (temperature and humidity ratio) in both longitudinal and transverse directions. The validation of the current model is done with a well-defined analytical case, the results of both cases show a very good agreement and consistency. A case study from literature has been chosen to compare between the current model results, and the results from traditional e-NTU method with adiabatic fin-tip assumption which used generally by many authors for modeling and analyzing the evaporator performance. The tube wall temperature is varied from 1.4°C to 17°C, under constant inlet air temperature and humidity ratio. These conditions allow different scenarios for the tube and fin (totally wet, totally dry, or partially wet). Deviations in results between the current model and the traditional e-NTU approach are noticed, especially under partially wet fin condition. These deviations are mainly due to the assumptions which normally adopted by the e-NTU method and fin theory such as; no variation in moist air temperature and humidity ratio along the direction between tubes, the whole segment (tube and fin) is usually assumed to be either completely dry or wet and no accounting for partially wet scenario.
Documents disponibles
Format PDF
Pages : 10 p.
Disponible
Prix public
20 €
Prix membre*
15 €
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Impact of dehumidification modelling on the performance prediction for minichannel evaporators.
- Identifiant de la fiche : 30013334
- Langues : Anglais
- Source : 2014 Purdue Conferences. 15th International Refrigeration and Air-Conditioning Conference at Purdue.
- Date d'édition : 14/07/2014
Liens
Voir d'autres communications du même compte rendu (203)
Voir le compte rendu de la conférence
Indexation
-
Numerical prediction of frost properties and pe...
- Auteurs : HWANG J., CHO K.
- Date : 10/2014
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 46
- Formats : PDF
Voir la fiche
-
Fin performance analysis for microchannel heat ...
- Auteurs : HUANG L., BACELLAR D., AUTE V., et al.
- Date : 14/07/2014
- Langues : Anglais
- Source : 2014 Purdue Conferences. 15th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Performance investigation and structural improv...
- Auteurs : YU J., YANG J., WANG S., YAN W.
- Date : 21/08/2023
- Langues : Anglais
- Source : Proceedings of the 26th IIR International Congress of Refrigeration: Paris , France, August 21-25, 2023.
- Formats : PDF
Voir la fiche
-
Numerical analysis of fluid flow and heat trans...
- Auteurs : MOHANTA L., JOARDAR A., ESFORMES J. L., et al.
- Date : 09/07/2018
- Langues : Anglais
- Source : 2018 Purdue Conferences. 17th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Theoretical analysis and experimental design of...
- Auteurs : GU Y., ZOU Y., PAN S., et al.
- Date : 24/08/2019
- Langues : Anglais
- Source : Proceedings of the 25th IIR International Congress of Refrigeration: Montréal , Canada, August 24-30, 2019.
- Formats : PDF
Voir la fiche