Partager

Document IIF

Influence de la résistance thermique d'interface d'un composite bimétallique gadolinium/cuivre sur le froid magnétique à l'état solide.

Influence of the interfacial thermal resistance of a gadolinium/copper bimetal composite on solid-state magnetic refrigeration.

Auteurs : LU B., HUANG Y., HUANG J., MA Z., WANG J., HE J.

Type d'article : Article de la RIF

Résumé

The low heat transfer efficiency caused by a magnetocaloric material (MCM) with low thermal conductivity is the bottleneck that limits the performance of magnetic refrigeration (MR). Previous studies have shown that a bimetal composite of a high thermal conductivity material and an MCM is effective in improving the heat transfer rate. However, the bimetal composite structure causes extra interfacial thermal resistance (ITR). Therefore, this study investigates the processing of gadolinium/copper bimetal composites by fusion casting and experimentally determines the ITR. To evaluate the structural heat transfer capability, the equivalent thermal conductivity (keq) is proposed, which is calculated based on the ITR result and simulation. The influence of the ITR and keq on the cooling performance of a fully solid-state MR is carefully investigated using a validated simulation model. The results show that the smallest ITR of 3.74 × 10−5 m2 K W−1 is obtained with a copper pouring temperature of 1200 °C owing to the thinnest bonding interfacial layer. The topology-optimized structure, using the ITR obtained by fusion casting, has an keq of 159.8 W m−1 K−1, with an increase of 39% compared to the structure assembled with thermal grease. As a result, the maximum specific cooling power (SCPmax) range and corresponding optimal operating range are significantly expanded to 45.6–209.3 W kg−1 and 0.23–0.61 rpm, respectively, with an average SCPmax increase of 35.5%. The combination of using topology optimization design to reduce the structural thermal resistance and using a suitable forming process to reduce the ITR can be more beneficial to the performance improvement of solid-state MR.

Documents disponibles

Format PDF

Pages : 90-98

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Influence of the interfacial thermal resistance of a gadolinium/copper bimetal composite on solid-state magnetic refrigeration.
  • Identifiant de la fiche : 30031959
  • Langues : Anglais
  • Sujet : Technologie
  • Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 153
  • Date d'édition : 09/2023
  • DOI : http://dx.doi.org/10.1016/j.ijrefrig.2023.06.025

Liens


Voir d'autres articles du même numéro (32)
Voir la source

Indexation