Installation de capteurs sur les surfaces de bâtiments historiques.
Mounting of sensors on surfaces in historic buildings.
Numéro : pap. BAG-04
Auteurs : RAFFLER S., BICHLMAIR S., KILLIAN R.
Résumé
Museums are often housed in historic buildings or sometimes also the building itself is part of the exhibition, like in open-air museums. In heritage buildings, it can be necessary to monitor the hygrothermal behaviour of building components and the indoor climate for conservation purposes or for energetic refurbishment. When measuring heat flows and surface temperature, direct contact between sensor and surface must be ensured reliably over the entire measurement period. These installations are usually performed by technicians and not by conservators. Conventional installation procedures cannot be carried out without damages to sensitive original surfaces when the sensors are removed later. The aim of this cooperation between building physicists and conservators is to develop a system, where neither substance losses occur nor unwanted residues with unknown aging behaviour remain after dismantling the installation and which does not affect the measurement results significantly. For this purpose new mounting systems for surface sensors and other technical installation have been developed, tested and applied. Test measurements were carried out to assess uncertainties of the different reversible mounting systems in comparison to conventional methods. The paper shows the test mock up and results of the evaluation by building physicists and conservators. The condition of the surfaces after removing the sensor as well as the influence of the different systems on the temperature and heat flow measurements are assessed.
Documents disponibles
Format PDF
Pages : 12 p.
Disponible
Prix public
20 €
Prix membre*
15 €
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Mounting of sensors on surfaces in historic buildings.
- Identifiant de la fiche : 30012348
- Langues : Anglais
- Sujet : Environnement
- Source : 49th AiCARR International Conference. Historical and existing buildings: designing the retrofit. An overview from energy performances to indoor air quality.
- Date d'édition : 02/2014
Liens
Voir d'autres communications du même compte rendu (39)
Voir le compte rendu de la conférence
-
Integrating Li-Fi wireless communication and en...
- Auteurs : HUANG Q., LI X., SHAURETTE M.
- Date : 14/07/2014
- Langues : Anglais
- Source : 2014 Purdue Conferences. 3rd International High Performance Buildings Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Régulation par apprentissage : application au c...
- Auteurs : GERASSIMOFF G., JEBALI G., PEFFER T.
- Date : 03/2018
- Langues : Français
- Source : Revue générale du Froid & du Conditionnement d'air - n.1168
Voir la fiche
-
A new control framework for the visual environm...
- Auteurs : KIM M., KONSTANTZOS I.
- Date : 09/07/2018
- Langues : Anglais
- Source : 2018 Purdue Conferences. 5th International High Performance Buildings Conference at Purdue.
- Formats : PDF
Voir la fiche
-
An optimal control approach to sensor/actuator ...
- Auteurs : BORGGAARD J., BURNS J., CLIFF E., et al.
- Date : 16/07/2012
- Langues : Anglais
- Source : 2012 Purdue Conferences. 2nd International High Performance Buildings Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Thermal regulation of building-integrated photo...
- Auteurs : HUANG M. J., EAMES P. C., NORTON B.
- Date : 06/2004
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 47 - n. 12-13
Voir la fiche