Intégration d’un stockage à base de matériaux à changement de phase dans les systèmes de distribution d’air afin d’augmenter la flexibilité énergétique des bâtiments.
Integration of phase change material-based storage in air distribution systems to increase building power flexibility
Numéro : 3565
Auteurs : HLANZE P., ELHEFNY A., JIANG Z., CAI J., SHABGARD H.
Résumé
This paper presents a novel energy storage solution by incorporating phase change material (PCM) in the building supply-air duct to increase a building’s thermal storage capacity. This solution has various advantages compared to PCM-integrated walls including more effective heat transfer (forced convection and greater temperature differentials). During off-peak hours, the system runs at a supply-air temperature below the material’s solidification point to charge the PCM with cooling energy. During on-peak hours, a higher supply-air temperature is utilized so that the stored energy can be discharged into the supply-air. This shifts a portion of the building’s cooling load from the on-peak hours to the off-peak hours. A numerical model for the melting and solidification of PCM in the duct was developed and modified using experimental data. Whole building energy simulations were conducted by coupling the PCM model with EnergyPlus DOE prototypical building model in a Simulink co-simulation platform. Simulations were performed for three cities in different climate zones over a three-month cooling season (June to August), and the PCM storage reduced the on-peak energy consumption by 20-25%. The electricity cost and payback period were determined using current time-of-use electricity rates.
Documents disponibles
Format PDF
Pages : 10
Disponible
Prix public
20 €
Prix membre*
15 €
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : Integration of phase change material-based storage in air distribution systems to increase building power flexibility
- Identifiant de la fiche : 30028661
- Langues : Anglais
- Sujet : Technologie
- Source : 2021 Purdue Conferences. 6th International High Performance Buildings Conference at Purdue.
- Date d'édition : 24/05/2021
- Document disponible en consultation à la bibliothèque du siège de l'IIF uniquement.
Liens
Voir d'autres communications du même compte rendu (52)
Voir le compte rendu de la conférence
-
Modelling constructions with phase-change mater...
- Auteurs : SCHULTZ J. M.
- Date : 11/2018
- Langues : Anglais
- Source : EcoLibrium - vol. 17 - n. 10
- Formats : PDF
Voir la fiche
-
Analysis of residential time-of-use utility rat...
- Auteurs : SULTAN S., HIRSCHEY J., GLUESENKAMP K. R., GRAHAM S.
- Date : 24/05/2021
- Langues : Anglais
- Source : 2021 Purdue Conferences. 6th International High Performance Buildings Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Experimental Thermal Response Study of Multilay...
- Auteurs : REHMAN A. U., SHEIKH S. R., KAUSAR Z., GRIMES M., MCCORMACK S. J.
- Date : 09/2022
- Langues : Anglais
- Source : Energies - 15 - 17
- Formats : PDF
Voir la fiche
-
Simulation of Phase Change Material absorbers f...
- Auteurs : HASSABOU A., ISAIFAN R. J.
- Date : 12/2022
- Langues : Anglais
- Source : Energies - vol. 15 - 24
- Formats : PDF
Voir la fiche
-
Towards a Techno-Economic Analysis of PCM-Integ...
- Auteurs : HELMNS D., BLUM D., CASILLAS A., PRAKASH A., WOOLLEY J., VERNON D., WOODCOX M., DUTTON S.
- Date : 24/05/2021
- Langues : Anglais
- Source : 2021 Purdue Conferences. 6th International High Performance Buildings Conference at Purdue.
- Formats : PDF
Voir la fiche