Partager

La modélisation basée sur l’expérimentation de l’expansion de la puissance frigorifique d’une pompe à chaleur à adsorption de 1 kW à 10 kW.

Adsorption heat pump upscaling from 1 kW to 10 kW of cooling power: experimental based modelling.

Numéro : AD-SY-1057

Auteurs : DAGUENET-FRICK X., MOULLET Y., GANTENBEIN P., et al.

Résumé

The cooling power of a closed adsorption system is depending on the thermo-physical properties of the material combination sorbent – sorbate. The temperature levels and the mass flow rate of the external heat sources and sinks has to be adapted. Based on experimental results of a 1 kW average cooling power adsorption-desorption test setup using silica gel beads placed in a lamella-tube all-aluminum heat exchanger, a scale-up to 10 kW is proposed and planned. For the steady state modelling, a linear dependence of the exchanged heat in function of the average temperature differences (adsorber minus evaporator temperature and desorber minus condenser temperature) is assumed. Based on this modelling a parametrical study is carried out to optimize the 10 kW prototype. Two different adsorber/desorber geometries as well as two hydraulic designs (in the medium temperature fluid loop, condenser and adsorber connected either in parallel or in serial) are assessed.

Détails

  • Titre original : Adsorption heat pump upscaling from 1 kW to 10 kW of cooling power: experimental based modelling.
  • Identifiant de la fiche : 30022951
  • Langues : Anglais
  • Source : International sorption heat pump conference, ISHPC 2017, Tokyo august 7-10.
  • Date d'édition : 07/08/2017

Liens


Voir d'autres communications du même compte rendu (159)
Voir le compte rendu de la conférence

Indexation