Partager

Document IIF

Les recommandations de conception pour les pompes à chaleur au R-718 dans des applications à haute température.

Design recommendations for R-718 heat pumps in high temperature applications.

Numéro : pap. 1367

Auteurs : ZÜHLSDORF B., SCHLEMMINGER C., BANTLE M., et al.

Résumé

The transition towards carbon neutral industry requires sustainable and climate friendly heat supply. Heat pumps can meet these requirements, but currently achievable temperatures for supply of process heat are limited to around 100 °C. Using water (R-718) as refrigerant shows a good thermodynamic and environmental performance at higher temperatures, while a sophisticated design is required to compensate increased investment cost due to relatively large volume flows. This work analyses the design of two-stage R-718 heat pumps with turbo compressors with a focus on desuperheating and suggests design recommendations to ensure a competitive thermodynamic and economic performance. The results have shown that the economic performance becomes especially competitive at evaporation temperatures above 100 °C with COPs of up to 4.3 and specific investment cost below 250 €/kW of supplied heat. The suggested approach to realize the desuperheating was found as the optimal solution with respect to pressure drop and space requirements.

Documents disponibles

Format PDF

Pages : 10

Disponible

Gratuit

Télécharger

Détails

  • Titre original : Design recommendations for R-718 heat pumps in high temperature applications.
  • Identifiant de la fiche : 30023693
  • Langues : Anglais
  • Source : 13th IIR Gustav Lorentzen Conference on Natural Refrigerants (GL2018). Proceedings. Valencia, Spain, June 18-20th 2018.
  • Date d'édition : 18/06/2018
  • DOI : http://dx.doi.org/10.18462/iir.gl.2018.1367

Liens


Voir d'autres communications du même compte rendu (177)
Voir le compte rendu de la conférence

Indexation