Nouveau modèle de transfert de chaleur lors de l'ébullition et configuration de l'écoulement pour l'évaporation du dioxyde de carbone à l'intérieur de tubes horizontaux.
New flow boiling heat transfer model and flow pattern map for carbon dioxide evaporating inside horizontal tubes.
Auteurs : CHENG L., RIBATSKI G., WOJTAN L., et al.
Type d'article : Article
Résumé
A new flow boiling heat transfer model and a new flow pattern map based on the flow boiling heat transfer mechanisms for horizontal tubes have been developed specifically for CO2. Firstly, a nucleate boiling heat transfer correlation incorporating the effects of reduced pressure and heat flux at low vapour qualities has been proposed for CO2. Secondly, a nucleate boiling heat transfer suppression factor correlation incorporating liquid film thickness and tube diameters has been proposed based on the flow boiling heat transfer mechanisms so as to capture the trends in the flow boiling heat transfer data. In addition, a dryout inception correlation has been developed. Accordingly, the heat transfer correlation in the dryout region has been modified. In the new flow pattern map, an intermittent flow to annular flow transition criterion and an annular flow to dryout region transition criterion have been proposed based on the changes in the flow boiling heat transfer trends. The flow boiling heat transfer model predicts 75.5% of all the CO2 database within plus or minus 30%. The flow boiling heat transfer model and the flow pattern map are applicable to a wide range of conditions: tube diameters (equivalent diameters for non-circular channels) from 0.8 to 10 mm, mass velocities from 170 to 570 kg/m2.s, heat fluxes from 5 to 32 kW/m2 and saturation temperatures from -28 to 25°C (reduced pressures from 0.21 to 0.87). [Reprinted with permission from Elsevier. Copyright, 2006].
Détails
- Titre original : New flow boiling heat transfer model and flow pattern map for carbon dioxide evaporating inside horizontal tubes.
- Identifiant de la fiche : 2007-0978
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 49 - n. 21-22
- Date d'édition : 10/2006
Liens
Voir d'autres articles du même numéro (11)
Voir la source
Indexation
-
Thèmes :
Transfert de chaleur;
Transfert de masse;
CO2 - Mots-clés : Tube horizontal; Transfert de chaleur; Modélisation; Évaporateur; Échangeur de chaleur; Ébullition; CO2
-
Effect of oil on flow boiling heat transfer and...
- Auteurs : KIM S., HRNJAK P.
- Date : 16/07/2012
- Langues : Anglais
- Source : 2012 Purdue Conferences. 14th International Refrigeration and Air-Conditioning Conference at Purdue.
- Formats : PDF
Voir la fiche
-
Investigation of flow boiling in horizontal tub...
- Auteurs : WOJTAN L., URSENBACHER T., THOME J. R.
- Date : 07/2005
- Langues : Anglais
- Source : International Journal of Heat and Mass Transfer - vol. 48 - n. 14
Voir la fiche
-
Etude expérimentale sur le transfert de chaleur...
- Auteurs : SHAO L., HAN J., CHEN C., et al.
- Date : 12/2009
- Langues : Chinois
- Source : Journal of Refrigeration - vol. 30 - n. 6
- Formats : PDF
Voir la fiche
-
CO2 flow boiling heat transfer in horizontal tu...
- Auteurs : SUN Z., GROLL E. A.
- Date : 17/09/2002
- Langues : Anglais
- Formats : PDF
Voir la fiche
-
Model for prediction of flow boiling heat trans...
- Auteurs : LI M., DANG C., TANAKA S., et al.
- Date : 07/06/2010
- Langues : Anglais
- Source : ACRA2010. Asian conference on refrigeration and air conditioning: Tokyo, Japan, June 7-9, 2010.
- Formats : PDF
Voir la fiche