Résumé
Flow characterization of R134a condensing in a horizontal smooth round tube with 6.1 mm inner diameter is investigated in this study. The paper presents flow visualization and liquid film thickness measurement with mass flux from 50 to 200 kg m-2 s-1 and heat flux from 5 to 15 kW m-2, showing the effect of mass flux and heat flux on the onset of condensation, flow regime, film distribution and void fraction. All the measurement is taken at constant pressure of 1.319 MPa, which corresponds to a saturation temperature of 50°C. The result of flow visualization reveals that the condensation always starts in the bulk superheated (SH) region, as annular flow and the flow regime is strongly affected by mass flow, not heat flux. Based on the flow visualization in the condensing superheated (CSH) region, a new diabatic flow map is proposed to better represent the physics and predict flow regimes in CSH region. A film thickness measurement technique for round tube refined from critical angle method is described and calibrated. The calibration and comparison between the film thickness measurement result and flow visualization shows that the refined critical angle method is able to accurately describe the film distribution inside the tube. The film thickness measurement demonstrates that void fraction drops below one in the SH region, which is not taken into account for most conventional void fraction models. In addition, the void fraction measurement illustrates that mass flux has greater effect on slip ratio than heat flux. Besides, having film distribution information provides an opportunity to more objectively determine the flow regime and develop a more mechanistic model by utilizing the film geometry inside of the tube.
Documents disponibles
Format PDF
Pages : 10
Disponible
Prix public
20 €
Prix membre*
15 €
* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)
Détails
- Titre original : A new flow map and flow characterization of condensation in smooth round tube from superheated vapor.
- Identifiant de la fiche : 30018980
- Langues : Anglais
- Source : 2016 Purdue Conferences. 16th International Refrigeration and Air-Conditioning Conference at Purdue.
- Date d'édition : 11/07/2016
Liens
Voir d'autres communications du même compte rendu (274)
Voir le compte rendu de la conférence
Indexation
-
Flow regimes during condensation in superheated...
- Date : 12/2017
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 84
- Formats : PDF
Voir la fiche
-
Heat transfer mechanisms during refrigerant con...
- Auteurs : AZZOLIN M., BORTOLIN S., BERTO A., et al.
- Date : 24/08/2019
- Langues : Anglais
- Source : Proceedings of the 25th IIR International Congress of Refrigeration: Montréal , Canada, August 24-30, 2019.
- Formats : PDF
Voir la fiche
-
Analiza skraplania czynników chlodniczych w obs...
- Auteurs : BOHDAL T., FLORIANOWICZ M., KRUZEL M., et al.
- Date : 01/2012
- Langues : Polonais
- Source : Chlodnictwo - vol. 47 - n. 1-2
Voir la fiche
-
Void fractions for condensing refrigerant flow ...
- Auteurs : WINKLER J., KILLION J., GARIMELLA S.
- Date : 03/2012
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 35 - n. 2
- Formats : PDF
Voir la fiche
-
Two-phase flow regimes of condensing R-134a at ...
- Auteurs : VANDERPUTTEN M. A., JACOB T. A., SATTAR M., et al.
- Date : 12/2017
- Langues : Anglais
- Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 84
- Formats : PDF
Voir la fiche