Partager

Document IIF

Optimisation d'un refroidisseur à adsorption de type à tubes à ailettes grâce à la conception d'une expérience.

Optimization of a fin-tube type adsorption chiller by design of experiment.

Auteurs : HONG S. W., AHN S. H., KWON O. K., et al.

Type d'article : Article, Article de la RIF

Résumé

This paper presents a numerical analysis of the performance of a fin-tube type adsorption chiller associated with heat and mass transfer mechanisms. A two-dimensional axisymmetric transient model is developed and 10 parameters are used to investigate their effects on the performance of an adsorption chiller and to obtain the optimized conditions of a fin-tube type adsorption chiller. Ten parameters found in many other studies, such as fin pitch, fin thickness, fin height, diffusion coefficient, particle size, cycle time, cycle ratio, temperature of hot water, fluid velocity and porosity, are used in this study. Based on the design of experiment, an orthogonal array of 10 parameters with three levels, L27(313) is used for the analysis of variance (ANOVA) and through this method, each parameter's level of contribution is carefully examined. The result shows that fin thickness and the temperature of hot water are the dominant parameters for COP and SCP, respectively. The optimum conditions having the highest COP of 0.6782 and SCP of 217.68 W kg-1 are found through the result.

Documents disponibles

Format PDF

Pages : 49-56

Disponible

  • Prix public

    20 €

  • Prix membre*

    Gratuit

* meilleur tarif applicable selon le type d'adhésion (voir le détail des avantages des adhésions individuelles et collectives)

Détails

  • Titre original : Optimization of a fin-tube type adsorption chiller by design of experiment.
  • Identifiant de la fiche : 30012897
  • Langues : Anglais
  • Source : International Journal of Refrigeration - Revue Internationale du Froid - vol. 49
  • Date d'édition : 01/2015

Liens


Voir d'autres articles du même numéro (18)
Voir la source

Indexation